A30 and CTP18 panel can not sync

[Yisroel_MongoTEL]

(06-09-2023 11:37 PM)Jacob Cao Wrote:  Hi everyone,

I have an issue with A30 and CTP18 touch panel cannot pair, when plugged them into same network switch. They are pulling different IP range
10.x.x.x for A30
192.x.x.x for CTP18.
Try different switches same issue, but those switch we use totally fine for other devices
Try factory reset as well but cannot fix
If anyone has experience about this pls help.
Really appreciate for your help.

1. Do both devices get a ("pulling") DHCP IP from the router or one of them has a Static IP set (it should say in the status somewhere around the current IP)?
2. "... fine for other devices" but which range IPs do all those other devices get? This will tell you which devices of the 2 is the one with the "issue"
3. They're connected t a switch, but the IPs never come from a switch it comes from the router. Which router are they connected to and can you try a different router?