(02-26-2019 08:01 PM)complex1 Wrote: (02-26-2019 05:41 PM)c.holloway Wrote: I'm having an issue with ONLY the w60b DECT phones on a 3CX installation. The issue is that when calling 911, and only when calling 911, the phone is not using the correct SIP port. Instead of using port 3560 for the call, it goes back to the default of 5060 to make the call and thus fails. When calling any other number, it uses the correct port and the call goes through.
I have tried using the firmwares 77.83.0.20, 77.81.30, and 77.81.0.10 and it happens on all of them. I have attached pictures of the pertinent INVITE as captured by the pcap trace on the phone itself. The first attachment is the failed call to 911 and the second is the successful call to another number that uses the correct port.
This is a HUGE issue for us (and anyone really) that I need help with, any advise would be very welcome
Hi,
If you are using account 1 and dial 911, the default port of the emergency server is 5060.
Please disable the Emergency dialplan feature: “dialplan.emergency.enable = 0” or add “dialplan.emergency.server.1.port = 3560“ to the “yealink.W60B.fxs.xml” template.
Hope this will help.
Is there no way to do this via the web GUI? I can edit the template but that makes the device "unsupported" from the 3CX standpoint. Out of curiosity, why is that even setting, shouldn't calls to any number use the port specified by the provisioning?
(02-26-2019 08:29 PM)c.holloway Wrote: (02-26-2019 08:01 PM)complex1 Wrote: (02-26-2019 05:41 PM)c.holloway Wrote: I'm having an issue with ONLY the w60b DECT phones on a 3CX installation. The issue is that when calling 911, and only when calling 911, the phone is not using the correct SIP port. Instead of using port 3560 for the call, it goes back to the default of 5060 to make the call and thus fails. When calling any other number, it uses the correct port and the call goes through.
I have tried using the firmwares 77.83.0.20, 77.81.30, and 77.81.0.10 and it happens on all of them. I have attached pictures of the pertinent INVITE as captured by the pcap trace on the phone itself. The first attachment is the failed call to 911 and the second is the successful call to another number that uses the correct port.
This is a HUGE issue for us (and anyone really) that I need help with, any advise would be very welcome
Hi,
If you are using account 1 and dial 911, the default port of the emergency server is 5060.
Please disable the Emergency dialplan feature: “dialplan.emergency.enable = 0” or add “dialplan.emergency.server.1.port = 3560“ to the “yealink.W60B.fxs.xml” template.
Hope this will help.
Is there no way to do this via the web GUI? I can edit the template but that makes the device "unsupported" from the 3CX standpoint. Out of curiosity, why is that even setting, shouldn't calls to any number use the port specified by the provisioning?
Unfortunately, I don't even think editing the template is an option. In the most recent version of 3CX, when you set up a DECT phone, you're not given the option to use a template, unlike the deskphones, you don't get the option to pick a custom template.