[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
t-29G with EHS36 and Plantronics CS510
Author Message
anonymous1718628087441
Unregistered

 
Post: #2
RE: t-29G with EHS36 and Plantronics CS510
(10-23-2019 06:02 PM)davidfudge Wrote:  We have two Plantronics CS510 units along with two EHS36 purchased recently. We are trying to use these headsets with the t29G phones. All features are working except that the headset microphone does not work, no audio can be heard.

I have confirmed that the devices are connected properly. See below for the hardware/firmware versions.

Can anyone lend a hand here?

t-29G
Firmware Version 46.83.0.65
Hardware Version 46.0.0.128.0.0.16

EHS36
EHS 1 Hardware Version 48.16.0.0
EHS 1 Firmware Version 5.16.0.0

Dear customer,



Greetings. This is Ted from Yealink Technical Support team.



For this issue, we need to check some points below:

IP Phone Interface Type is RJ-12.

Besides here is the guide about EHS36, you can follow the steps to connect: EHS36_User_Guide_V1.6.pdf

Please go to phone website Settings-> Audio-> Use Headset or Use Headset & Speaker, try it again.



About no audio, we need your help us make this situation clearly:

When the call comes in, whether the phone receives the call normally?

The phone receives the call, even if the headset is not beep, is it normal if it is connected? Does the call have a sound via speaker?

Could please you provide the connection diagram?



If still not help, we need you help to reproduce this issue and offer us diagnosis files(config.bin / pcap.file / local syslog level 6), then we can do further analyzing.Below is the FAQ about how to get these files.

http://support.yealink.com/faq/faqInfo?id=707


Here is our ticket ID for this question: https://ticket.yealink.com/page/question...1&id=97864
And we will follow up this timely.


Hope this helps.


Best Regards,

Ted| Solutions Engineer | Yealink

(12-02-2019 01:41 PM)Ted_Yealink Wrote:  
(10-23-2019 06:02 PM)davidfudge Wrote:  We have two Plantronics CS510 units along with two EHS36 purchased recently. We are trying to use these headsets with the t29G phones. All features are working except that the headset microphone does not work, no audio can be heard.

I have confirmed that the devices are connected properly. See below for the hardware/firmware versions.

Can anyone lend a hand here?

t-29G
Firmware Version 46.83.0.65
Hardware Version 46.0.0.128.0.0.16

EHS36
EHS 1 Hardware Version 48.16.0.0
EHS 1 Firmware Version 5.16.0.0

Dear customer,



Greetings. This is Ted from Yealink Technical Support team.



For this issue, we need to check some points below:

IP Phone Interface Type is RJ-12.

Besides here is the guide about EHS36, you can follow the steps to connect: EHS36_User_Guide_V1.6.pdf

Please go to phone website Settings-> Audio-> Use Headset or Use Headset & Speaker, try it again.



About no audio, we need your help us make this situation clearly:

When the call comes in, whether the phone receives the call normally?

The phone receives the call, even if the headset is not beep, is it normal if it is connected? Does the call have a sound via speaker?

Could please you provide the connection diagram?



If still not help, we need you help to reproduce this issue and offer us diagnosis files(config.bin / pcap.file / local syslog level 6), then we can do further analyzing.Below is the FAQ about how to get these files.

http://support.yealink.com/faq/faqInfo?id=707


Here is our ticket ID for this question: https://ticket.yealink.com/page/question...1&id=97864
And we will follow up this timely.


Hope this helps.


Best Regards,

Ted| Solutions Engineer | Yealink


Attached File(s)
.pdf  EHS36_User_Guide_V1.6.pdf (Size: 1.03 MB / Downloads: 1)
12-02-2019 01:41 PM
     Quote this message in a reply
Post Reply 


Messages In This Thread
RE: t-29G with EHS36 and Plantronics CS510 - anonymous1718628087441 - 12-02-2019 01:41 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  EHS36 + DW Pro2 + beep bart@wiggers.com 1 2,130 09-11-2023 09:11 PM
Last Post: Yisroel_MongoTEL
  T48G + EHS36 + Sennheiser DW Pro - No Ring Tone miclan 1 6,995 08-25-2022 03:04 AM
Last Post: knewgent
  SIP-T29G & EHS36 Need Off-Hook Signal! Rob2001 0 2,550 04-26-2022 09:05 PM
Last Post: Rob2001
  T55A Teams Edition + EHS40 & Plantronics W740 craig.itdd 3 13,361 11-14-2020 02:05 AM
Last Post: BFlow
  Compatible RJ12 cable for EHS36 bnmand 3 10,926 10-29-2020 04:23 PM
Last Post: complex1
  EHS36 dead with T46G SCPCJNR 1 7,621 10-27-2020 08:08 AM
Last Post: bnmand
Question EH36 w/ CS510 Plantronics and T29G phone on Expansion Modules CHRISTOPHER 0 5,389 06-16-2020 02:41 PM
Last Post: CHRISTOPHER
  Update EHS36 with T41P? SPS 2 8,657 03-24-2020 01:20 PM
Last Post: Yisroel_MongoTEL
  T48G, EHS36 and Plantronics CS510 cmedvick 2 10,035 10-23-2019 02:17 PM
Last Post: cmedvick
Question A list of compatible wireless headsets together with the EHS36 or also directly USB? proofy 2 11,256 08-22-2019 06:08 AM
Last Post: Clan_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication