[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Caller id presentation info on BLF visual display
Author Message
Chris Barron Offline

Posts: 50
Joined: Sep 2015
Reputation: 0
Post: #3
RE: Caller id presentation info on BLF visual display
(09-23-2016 09:27 AM)Yealink_kevin Wrote:  Dear Chris

This is Kevin from Yealink support team, nice to know you.

For this issue, We replace the phone as character, such as T46:A; T41:B; caller phone:C.
Then let us check again with the sutiation:
B set BLF to monitor A, then C call A, B phone will display A<-C;
A set BLF to monitor B, then C call B, A just display B<-B, right?

Let me know if any misunderstanding. Also, please send the pacp,syslog,config.bin files to me , then i can do more trouleshooting. For how to get them, please refer to the FAQ:http://support.yealink.com/faq/faqInfo?id=311
NOTE:please reproduce the issue and send files to me. You should reproduce the 2 sutiation and send all fies to me, then i can do a comparison.


HI Kevin,
thanks for the quick response - yes the logic you describe is how i've set it up. Strangely, since i first tested on thursday the situation has changed. On the T46 its no longer showing the inbound number.

I've attached pcap traces from the phone and pcap traces from a local network capture via a bridge so i see both directions. The detail in the SIP notify shows only the extension number not the calling party's number. I tried changing the CID settings and it made no difference, the calling party did not appear in the notify messages however I set it.

Am I right in thinking that the phone presents the called party's name by referencing the extension number in the blf key and pulling back the name rather than relying on it being sent by the server. Because we are seeing the called extension number appearing in the Notify message for the called and call party then its showing Barry<<Barry.
I;ve got a tech case running with the third line support guys on the server side so I will update you.

Also I think I may have missed the syslog files - will end those later - chris[attachment=2994]
09-26-2016 06:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Caller id presentation info on BLF visual display - Chris Barron - 09-26-2016 06:33 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to show caller Phone Number when call is forwarded gijoe 0 526 05-31-2022 07:40 PM
Last Post: gijoe
  T48s setting outbound caller ID thunderzhao 1 2,783 09-10-2021 04:08 PM
Last Post: complex1
Bug Visual Alert for BLF Pickup - limit to group only Maciejp 2 2,721 08-11-2021 01:40 PM
Last Post: Maciejp
  T48S Display Language change (Step by Step) schost 0 2,474 03-04-2021 04:02 PM
Last Post: schost
  Call Park + Audible / Visual Alerts bdm 0 2,169 02-23-2021 04:24 AM
Last Post: bdm
  Call-Info sip header for T46G sidjf3zhdu 9 22,448 02-22-2021 04:06 PM
Last Post: jiansong
  Caller image (avatar) not shown StefanR 1 3,119 01-01-2021 05:45 PM
Last Post: mariovoip
  Caller ID on attended transfer tcarter@teklinks.com 11 29,398 10-27-2020 01:29 AM
Last Post: sentinelace
Question Switch account on T48S - Outgoing caller ID remains at default account puregin 0 2,460 09-30-2020 09:52 AM
Last Post: puregin
  caller ID source --> display permanently wouternotebaert 1 3,350 09-07-2020 02:47 PM
Last Post: David_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication