Direct Call Pickup Codes

[CWR]

I see this in their manual:

Code:

How to use Remote Pickup
To pickup an incoming call from another phone, simply dial ** and then either the Short Code
(similar to extension number) or the MyNetFone number of the phone that you want to pick up
the call from.
For example: Phone ‘A’ has a Short Code of 2000 and a MyNetFone Number of 09001234.
If Phone ‘A’ receives an incoming call, you can remotely pick it up from any phone on the
same Virtual PBX account by dialing either **2000 or **09001234.

So with a T46 - I would just make a DSS Key for each extension as the pickup - maybe like a Speed Dial.
Label is what shows on the screen, value would be **<number as above>

Perhaps also try setting Direct Call Pickup value to ** and Create a BLF DSS Key for the extension. The BLF Value is the ShortCode. The Label is the persons Name, the extension is their extension.