T28P / v2.70.0.130 Firmware - BLF Not Working

[SupermanSC]

Your scenario is correct, however I will expand on this further. For our test environment on V70 code, we have 5 T28P phones configured on a FreeSwitch-based system. Incoming/outgoing calls work great. We've programmed the first 5 Memory/DSS Keys the same on all 5 phones - we want to show all 5 users statuses on all 5 phones.

This issue happens constantly - we have yet to get BLF working in this environment. We do not have any V61 phones to test this with as we're focused on building our system to support the V70 code. That said, it works fine on Polycom IP phones.

Prior to leaving the office yesterday, I reboot all phones and all the Memory/DSS keys on all phones were not lit. When I got in today, here is how they are lit:

Phone 1: All 5 DSS Lights are green. If I dial out on Phone 2, 3, 4, or 5, none of these lights will change to red.

Phone 2: Slot 1, 2 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

Phone 3: Slot 1, 2 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

Phone 4: Slot 1 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

Phone 5: Slot 1 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

All of these phones have identical configurations with the exception of these values changing:

account.1.label =
account.1.display_name =
account.1.user_name =
account.1.auth_name =
account.1.password =

I am PM'ing you the PCAP files for v70 firmware. As I stated earlier, I do not have v61 firmware.

---

How can I send you the PCAP file? It won't let me add an attachment to a PM from what I can tell.