T46S couple line on hold

[Fraukas2]

Hello,

Easier method that I'm currently using is placing DSS keys as Line type.

For example, place the linekeys 1 to 4 with the Type as Line.
Press the line key 1 and call someone, then press the line key 2 to call someone else, this will automatically put the 1st call on hold. Then press the line key 3 to call another person, this will automatically put the 2nd call on hold, etc.
When all calls are on hold, or if you hung up with a line, simply press the line key to resume the call with that person.

Auto provision code:

Code:

linekey.1.line = 1
linekey.1.type = 15
linekey.1.value = 0
linekey.2.line = 1
linekey.2.type = 15
linekey.2.value = 0
linekey.3.line = 1
linekey.3.type = 15
linekey.3.value = 0
linekey.4.line = 1
linekey.4.type = 15
linekey.4.value = 0

Let me know how it goes.

Frank