EDK Macro Help

[Oregon]

[quote='Oregon' pid='62433' dateline='1520925173']
[quote='Lucia_Yealink' pid='62429' dateline='1520901786']
HI Oregon，

Please refer to below the parameters which I can test successfully in my side:
#!version:1.0.0.1
features.enhanced_dss_keys.enable=1
edk.edklist.1.enable=1
edk.edklist.1.mname=test
edk.edklist.1.action=$KSoftKey1$7$PEnter Ext&C10&N&M$$Tinvite$

Hi,

Since my last reply, I have made some progress and am very close now. Building on your configuration, I now have:

edk.edklist.1.action = $KSoftKey1$7$PEnter Ext&C10&N&M$$Tinvite$
edk.edklist.1.enable = 1
edk.edklist.1.mname = test

edk.edkprompt.1.enable = 1
edk.edkprompt.1.label = Enter Ext
edk.edkprompt.1.type = numeric
edk.edkprompt.1.userfeedback = visible

softkey.1.action = !test
softkey.1.enable = 1
softkey.1.label = VMXfer
softkey.1.position = 1
softkey.1.softkey_id = custom_macro1
softkey.1.use.idle = 0
softkey.1.use.on_talk = 1

On an active(live) call, I now have a softkey called VMXfer in position 1 (excellent)
I can press the softkey and get the EDK Prompt (excellent)
I enter an extension number, 200 for example and press OK. Here is where the issue is. It then just grabs another line and dials 7200 and puts "me" into that voicemail box instead of transferring the caller there. I have tried using $KTransfer in the string, but that didn't help. The issue is that when I press the VMXfer softkey, it needs to essentially start a transfer, pop up the prompt, and after entering the extension and pressing OK, it completes the transfer to that voicemail box (7+ext).

To repeat, this is a T52s, which DOES NOT have a hard transfer key. I'm wondering if that is why $KTransfer won't work?

Thanks!