Trying a factory reset from the base unit and nothing happens

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode Trying a factory reset from the base unit and nothing happens
Author	Message

kueyama Offline

Junior Member

Posts: 4

Joined: Feb 2015

Reputation: 0

Post: #3

RE: Trying a factory reset from the base unit and nothing happens

Hi James,

Did another base reset and immediately unplugged the power when all three lights turned solid green. It rebooted. Had to re-register the handset with "0000" pin. After phone registers, it initializes provisioned with the info from our VoIP providers so right off the bat I know the base has not done a complete factory reset. Base gets an IP address and I am able to access the admin portal, but default username and password do not work still. Unless there is a menu option to get the firmware of the base from the handset I can't find out what that is since I can't log into the web interface.

Thanks!
Kenny

02-06-2015 01:56 AM

« Next Oldest | Next Newest »

Messages In This Thread

Trying a factory reset from the base unit and nothing happens - kueyama - 02-05-2015, 03:13 AM

RE: Trying a factory reset from the base unit and nothing happens - James_Yealink - 02-05-2015, 09:44 AM

RE: Trying a factory reset from the base unit and nothing happens - kueyama - 02-06-2015 01:56 AM

RE: Trying a factory reset from the base unit and nothing happens - James_Yealink - 02-06-2015, 10:09 AM

RE: Trying a factory reset from the base unit and nothing happens - kueyama - 02-07-2015, 01:27 AM

RE: Trying a factory reset from the base unit and nothing happens - James_Yealink - 02-07-2015, 10:21 AM

RE: Trying a factory reset from the base unit and nothing happens - kueyama - 02-10-2015, 04:10 AM

RE: Trying a factory reset from the base unit and nothing happens - James_Yealink - 02-10-2015, 02:54 PM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	W80 Base Teams SIP Gateway	Ascano	0	1,510	03-06-2023 06:12 PM Last Post: Ascano
	W56H with W52P Base	dmvcomms	7	8,408	03-06-2023 04:39 PM Last Post: poznaniak
	not able to reigster to the base	Janpreet	0	1,647	02-24-2023 12:16 AM Last Post: Janpreet
	Completely reset a Yealink W52H	MartijnSanders	0	3,607	01-17-2022 07:24 PM Last Post: MartijnSanders
	internal call between two base stations fails	janus	1	7,461	01-07-2021 07:20 PM Last Post: complex1
	Openvpn connection reset	mrdibb	4	13,246	07-08-2020 02:05 PM Last Post: mrdibb
	W52P factory reset without password	ralph	1	9,871	04-02-2020 03:05 AM Last Post: Yisroel_MongoTEL
	Can't de-register default base	Nigutz	9	33,539	07-15-2019 09:11 PM Last Post: GregoireG
	double base station proximity	ipv6fill	2	10,586	03-21-2017 08:39 AM Last Post: Kevin_Yealink
	New Handset Can't Register to Base	SergioA	2	13,057	01-06-2017 06:20 PM Last Post: SergioA

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in