SIP-T21P - No audio if SRTP used, also, and no spanish web UI

[jcvh]

Thank you James for your quick response, my comments:

(09-24-2014 09:54 AM)Yealink_James Wrote:  Hi JuanV,

What's the firmware of your T21?
Please upgrade to latest 34.72.0.75 and chcek again.

http://www.yealink.com/Upload/UCOne/2014...2.0.75.zip

Sorry, i should have said this:
The first thing i did, even before loading any configuration, was upgrade the firmware to the latest version available in de yealink web page, being the exact same you say, 34.72.0.75 .-

(09-24-2014 09:54 AM)Yealink_James Wrote:  1.The firmware should contain Spanish.

I can confirm that the telephone user interface has spanish, this is, the telephone's screen display and menus, but the Web User Interface does not.

(09-24-2014 09:54 AM)Yealink_James Wrote:  2.If the SRTP no voice problem still occurs in this firmware, please get a pcap trace/ level 6 syslog/ config.bin file.

http://forum.yealink.com/forum/showthread.php?tid=1319

I'll provide those as soon as posible.

(09-24-2014 09:54 AM)Yealink_James Wrote:  3.In last firmware the Router mode has been removed in all Yealink model because almost no users will use this mode. The default port mode is Bridge.

In this document:
http://www.yealink.com/Upload/UCOne/2014...n72%20.pdf
Item 3.1 (line 35. first item under "Bug Fixes") reads: "1. Modified the PC Port Configuration of T20/T22/T26/T28 to Router mode by default."

By the way, i need to make you notice that, while using SRTP, once a call is sent to the phone, it looses ALL AUDIO CAPABILITIES, it does "ring": the line button blink, and the incomming call info shows in the screen, that is, but it does not make any noise.

Besides, i noticed that my hardware version is "34.1.0.0.0.0.0", thas doesn't fit in the usual nomenclature, is this normal?

Thanks again!

Regards!

JuanV