T26 Update Firmware 6.71.0.140 Problem

[antonio3ds]

Hello,

I'm testing the new firmware and I noticed these anomalies:

1) DSS does not update on provisionig;

current syntax:

memorykey.1.line = 1
memorykey.1.value = 279
memorykey.1.pickup_value =
memorykey.1.type = 13
memorykey.1.label = test
memorykey.1.xml_phonebook =


2) Internal directory non funziona;

current syntax:

local_contact.data.url = https://tests/ContactData.xml

3) LDAP charge ldap attributes during provisioning but does not work;

current syntax:

ldap.enable = 1
ldap.customize_label =
ldap.name_filter = (|(displayName=%)(sn=%)(givenName=%)(cn=%))
ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(homePhone=%)(facsimileTelephoneNumber=%)(Telepho​ne-Office2=%))
ldap.host = ldap.twt.it
ldap.port = 389
ldap.base = uid=TestRubricaProd.pbx.TEST.it,dc=rubrica
ldap.user = uid=TestRubricaProd.pbx.TEST.it,dc=rubrica
ldap.password = rossella
ldap.max_hits = 0
ldap.name_attr = sn givenName cn displayName
ldap.numb_attr = telephoneNumber mobile homePhone facsimileTelephoneNumber Telephone-Office2 Telephone-Assistant
ldap.display_name = %cn
ldap.version = 3
ldap.search_delay = 2000
ldap.call_in_lookup = 1
ldap.ldap_sort = 1
ldap.dial_lookup = 1



It could be a syntax error or a problem in the firmware, please check and give me information.

I have several T26 to update.

thanks
Antonio

[compsos]

(09-27-2013 06:36 PM)antonio3ds Wrote:  Hello,

I'm testing the new firmware and I noticed these anomalies:

1) DSS does not update on provisionig;

current syntax:

memorykey.1.line = 1
memorykey.1.value = 279
memorykey.1.pickup_value =
memorykey.1.type = 13
memorykey.1.label = test
memorykey.1.xml_phonebook =


2) Internal directory non funziona;

current syntax:

local_contact.data.url = https://tests/ContactData.xml

3) LDAP charge ldap attributes during provisioning but does not work;

current syntax:

ldap.enable = 1
ldap.customize_label =
ldap.name_filter = (|(displayName=%)(sn=%)(givenName=%)(cn=%))
ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(homePhone=%)(facsimileTelephoneNumber=%)(Telepho​ne-Office2=%))
ldap.host = ldap.twt.it
ldap.port = 389
ldap.base = uid=TestRubricaProd.pbx.TEST.it,dc=rubrica
ldap.user = uid=TestRubricaProd.pbx.TEST.it,dc=rubrica
ldap.password = rossella
ldap.max_hits = 0
ldap.name_attr = sn givenName cn displayName
ldap.numb_attr = telephoneNumber mobile homePhone facsimileTelephoneNumber Telephone-Office2 Telephone-Assistant
ldap.display_name = %cn
ldap.version = 3
ldap.search_delay = 2000
ldap.call_in_lookup = 1
ldap.ldap_sort = 1
ldap.dial_lookup = 1



It could be a syntax error or a problem in the firmware, please check and give me information.

I have several T26 to update.

thanks
Antonio

Hi Antonio

Did you manage to get the phones to pickup the new firmware from the y00000000004.cfg file? I could not find a command line to define the firmware version to load, just the tftp ip address.

Gordon

[Yealink Support]

Hi antonio3ds,

Sorry for the late reply. Please see my answers in below.

1) DSS can update on provisionig using your syntax, but there is not the display for label.

current syntax:

memorykey.1.line = 1
memorykey.1.value = 279
memorykey.1.pickup_value =
memorykey.1.type = 13
memorykey.1.label = test
memorykey.1.xml_phonebook =

2. Please use the latest Internal directory;

Right syntax:

local_contact.data.url = tftp://192.168.1.100/contact_list.xml

3. There isn't the syntax of below:
ldap.enable = 1
ldap.customize_label =

So please refer to the latest guide and templates of V71.
http://www.yealink.com/Upload/T2X/T2X-V7...71_141.pdf
http://www.yealink.com/Upload/T2X/T2X-V7...ioning.zip