T26 Update Firmware 6.71.0.140 Problem - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Video Collaboration (/forumdisplay.php?fid=5) +--- Forum: VP530 (/forumdisplay.php?fid=25) +--- Thread: T26 Update Firmware 6.71.0.140 Problem (/showthread.php?tid=855) |
T26 Update Firmware 6.71.0.140 Problem - antonio3ds - 09-27-2013 06:36 PM Hello, I'm testing the new firmware and I noticed these anomalies: 1) DSS does not update on provisionig; current syntax: memorykey.1.line = 1 memorykey.1.value = 279 memorykey.1.pickup_value = memorykey.1.type = 13 memorykey.1.label = test memorykey.1.xml_phonebook = 2) Internal directory non funziona; current syntax: local_contact.data.url = https://tests/ContactData.xml 3) LDAP charge ldap attributes during provisioning but does not work; current syntax: ldap.enable = 1 ldap.customize_label = ldap.name_filter = (|(displayName=%)(sn=%)(givenName=%)(cn=%)) ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(homePhone=%)(facsimileTelephoneNumber=%)(Telephone-Office2=%)) ldap.host = ldap.twt.it ldap.port = 389 ldap.base = uid=TestRubricaProd.pbx.TEST.it,dc=rubrica ldap.user = uid=TestRubricaProd.pbx.TEST.it,dc=rubrica ldap.password = rossella ldap.max_hits = 0 ldap.name_attr = sn givenName cn displayName ldap.numb_attr = telephoneNumber mobile homePhone facsimileTelephoneNumber Telephone-Office2 Telephone-Assistant ldap.display_name = %cn ldap.version = 3 ldap.search_delay = 2000 ldap.call_in_lookup = 1 ldap.ldap_sort = 1 ldap.dial_lookup = 1 It could be a syntax error or a problem in the firmware, please check and give me information. I have several T26 to update. thanks Antonio RE: T26 Update Firmware 6.71.0.140 Problem - compsos - 10-21-2013 04:35 PM (09-27-2013 06:36 PM)antonio3ds Wrote: Hello, Hi Antonio Did you manage to get the phones to pickup the new firmware from the y00000000004.cfg file? I could not find a command line to define the firmware version to load, just the tftp ip address. Gordon RE: T26 Update Firmware 6.71.0.140 Problem - Yealink Support - 10-28-2013 04:56 PM Hi antonio3ds, Sorry for the late reply. Please see my answers in below. 1) DSS can update on provisionig using your syntax, but there is not the display for label. current syntax: memorykey.1.line = 1 memorykey.1.value = 279 memorykey.1.pickup_value = memorykey.1.type = 13 memorykey.1.label = test memorykey.1.xml_phonebook = 2. Please use the latest Internal directory; Right syntax: local_contact.data.url = tftp://192.168.1.100/contact_list.xml 3. There isn't the syntax of below: ldap.enable = 1 ldap.customize_label = So please refer to the latest guide and templates of V71. http://www.yealink.com/Upload/T2X/T2X-V71/Yealink_SIP-T2%20Series_T3_Series_VP530_IP%20Phones_Auto_Provisioning_Guide_V71_141.pdf http://www.yealink.com/Upload/T2X/T2X-V71/AutoProvisioning.zip |