[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bugs in firmware v28.71.0.108
Author Message
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #1
Bugs in firmware v28.71.0.108
There are a couple of provisioning bugs in all the T46G firmwares (including 28.71.0.108) where certain provisioned values don't get picked up by the phone. The values are:

account.1.enable = 1

and

network.vlan.internet_port.enable = 1

Both of those values are disabled by default and when they're provisioned to be enabled, they get ignored. Both can be set manually, without issue, through the web GUI, however.
08-20-2013 01:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #2
RE: Bugs in firmware v28.71.0.108
doesn't look like the sidetone option gets picked up either
08-20-2013 06:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
pacpac Offline
Junior Member
**

Posts: 20
Joined: Aug 2013
Reputation: 0
Post: #3
RE: Bugs in firmware v28.71.0.108
(08-20-2013 06:42 AM)briankelly63 Wrote:  doesn't look like the sidetone option gets picked up either

I set "voice.side_tone= -3" after "voice.headset_send" in the "Voice" section, then auto provision. It clearly works on my end. I placed the code under firmware 105 and it did carry over when upgraded to 108.
08-20-2013 07:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #4
RE: Bugs in firmware v28.71.0.108
when I tried the latest firmware it didn't work for me. I had to restore my saved config before it would work. A number of quirky things seem to be related to the fact that I have a stored VPN configuration that even though its not enabled it seems to affect some settings.
08-20-2013 09:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 895 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  SIP-T46G Need firmware update instructions RobbyK 2 1,291 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,621 11-23-2023 06:45 PM
Last Post: Darsh
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 2,065 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,214 05-05-2023 08:07 PM
Last Post: complex1
  T48U Custom Firmware Upgrade to Official Friendly 0 2,088 03-29-2023 01:20 AM
Last Post: Friendly
  Yealink T41S firmware kosif 0 2,104 12-19-2022 08:52 AM
Last Post: kosif
  T42S unable to update firmware brianstoiber 6 8,321 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 7,612 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 6,732 01-14-2022 10:22 AM
Last Post: kumagera

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication