+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Bugs in firmware v28.71.0.108 (/showthread.php?tid=761)
Bugs in firmware v28.71.0.108 - Boolah - 08-20-2013 01:07 AM
There are a couple of provisioning bugs in all the T46G firmwares (including 28.71.0.108) where certain provisioned values don't get picked up by the phone. The values are:
account.1.enable = 1
and
network.vlan.internet_port.enable = 1
Both of those values are disabled by default and when they're provisioned to be enabled, they get ignored. Both can be set manually, without issue, through the web GUI, however.
RE: Bugs in firmware v28.71.0.108 - briankelly63 - 08-20-2013 06:42 AM
doesn't look like the sidetone option gets picked up either
RE: Bugs in firmware v28.71.0.108 - pacpac - 08-20-2013 07:05 AM
(08-20-2013 06:42 AM)briankelly63 Wrote: doesn't look like the sidetone option gets picked up either
I set "voice.side_tone= -3" after "voice.headset_send" in the "Voice" section, then auto provision. It clearly works on my end. I placed the code under firmware 105 and it did carry over when upgraded to 108.
RE: Bugs in firmware v28.71.0.108 - briankelly63 - 08-20-2013 09:37 PM
when I tried the latest firmware it didn't work for me. I had to restore my saved config before it would work. A number of quirky things seem to be related to the fact that I have a stored VPN configuration that even though its not enabled it seems to affect some settings.