[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Custom Wallpaper
Author Message
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #1
Custom Wallpaper
I am able to provision and use custom wallpaper on the T46G without issue in firmware v28.71.0.105 (wallpaper_upload.url=wallpaper.jpg and phone_setting.backgrounds=Config:wallpaper.jpg).

However, if the user changes the wallpaper, re-provisioning the phone does not appear to bring the provisioned wallpaper back, but rather, leaves the user-selected wallpaper in place. Is this by design? If so, can it be changed so that any provisioned wallpaper is reapplied when the phone is re-provisioned?

The wallpaper does appear to be reapplied when the firmware is changed, but not when the phone is re-provisioned or rebooted.
08-06-2013 11:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Custom Wallpaper
Hi Boolah,
When you re-provisioning, did you change your cfg file?
If the phone detect that the cfg file is the same as before, it will not apply to the phone.
So you can for example add a blank to the cfg file when you re-provisioning.
You can have a try.
08-07-2013 03:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #3
RE: Custom Wallpaper
That was the issue.

Is there any way to force the phone to apply provisioned settings when the phone is booted or manually provisioned, even if the provisioning file hasn't changed? If provisioned settings on the phone can be changed through the LCD/web interface, forcing a provision should reset them to their provisioned values, irrespective if the provisioning file has changed or not.
08-07-2013 07:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Custom Wallpaper
Hi Boolah,
Now the phone only detect whether MD5 value of the cfg file is the same as before cfg file, no matter the configuration of the phone change or not.
So currently you should change the cfg file to re-provisioning.
08-08-2013 10:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #5
RE: Custom Wallpaper
Can this requirement/check either be removed or be made optional in a future firmware upgrade? I wouldn't want end-users changing any settings which are being provisioned.
08-09-2013 01:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: Custom Wallpaper
Hi Boolah,
Let me submit to our product department to evaluate this request.
08-09-2013 10:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Nology_Support Offline
Junior Member
**

Posts: 9
Joined: Jun 2014
Reputation: 0
Post: #7
RE: Custom Wallpaper
Hi,

Sorry to just jump in on this thread.
I'm also having difficulty loading a custom wallpaper onto the T48G via Web-GUI.

Please kindly assist.

regards
07-02-2014 05:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #8
RE: Custom Wallpaper
Hi Mumaxb,

Please check the wallpaper image format. It is the important point. It must meet the following:

[Image: attachment.php?aid=870]

About more information, please refer to the guide.(begin at page 39)

BTW, can you tell me what is your phone firmware?

thanks


Attached File(s) Thumbnail(s)
   
(This post was last modified: 07-03-2014 08:46 PM by Yealink Support.)
07-03-2014 08:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48U Custom Firmware Upgrade to Official Friendly 0 2,087 03-29-2023 01:20 AM
Last Post: Friendly
  T41S custom sip header volga629 0 1,113 03-20-2023 10:08 AM
Last Post: volga629
  Need to remove custom Fonality firmware 1CCT 16 39,011 05-03-2021 08:24 PM
Last Post: kmconklin
  T41P custom logo ausadmin 1 6,169 05-17-2020 08:21 AM
Last Post: complex1
  T48 Wallpaper (White Text or Black Text) Issue elementpbx 17 46,021 03-25-2019 12:05 AM
Last Post: ParagonVoIP
  Creating Custom BLF shortcuts intouchcomms 1 5,556 02-22-2019 08:39 PM
Last Post: nickpl
  How do you turn off custom linekey configuration ipcsolutions 2 7,369 01-28-2019 08:21 PM
Last Post: ipcsolutions
  custom ringtone with new BLF feature Chris Barron 0 4,582 11-07-2018 01:59 PM
Last Post: Chris Barron
  T41S Custom logo only displays temporarily cwacker 8 23,239 10-10-2018 06:20 PM
Last Post: jolouis
  About custom softkey Barry Mdfk 0 4,858 06-19-2018 10:02 AM
Last Post: Barry Mdfk

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication