[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G RTP Multicast - re-activate stream
Author Message
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #1
T46G RTP Multicast - re-activate stream
When a multicast RTP stream begins the phone activates it speaker and the stream can be heard.
If you pick up the receiver and hang up the connection to the stream is ended.
I would like an option that re-activates the speaker whenever the phone is idle and the stream is present.
In other words I'd like to prevent the stream from being deactivated.

This feature would be important for emergency use!
07-23-2013 10:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #2
RE: T46G RTP Multicast - re-activate stream
Hi Brian,
Do you mean during the paging call, you pick up the handset, and hang up, you still want the call can be continued, but not hang up?
If yes, before you hang up the handset, you can press Speaker button, then hang up, so the call will be continued.
Thanks.
07-25-2013 03:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #3
RE: T46G RTP Multicast - re-activate stream
Let me re-state:

Phone is idle, multicast page opens speaker, I pick up handset, I hang up handset. I would like the page to re-open the speaker and continue. In other words the phone should always respond to the IP multicast traffic even when I've previously hung up on it.

Currently the phone allows me to hang up on a page. In an emergency paging situation this would be a problem. The ONLY time the page should mute itself is if a make a call on a line or answer a call.

Multicast is just starting to be widely used so it would be a good idea to start designing options which can control its behavior under a variety of circumstances.
07-26-2013 12:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
joshua@itstel.com Offline
Junior Member
**

Posts: 41
Joined: Jul 2014
Reputation: 0
Post: #4
RE: T46G RTP Multicast - re-activate stream
Is there a way yet to re-activate the multicast stream yet?
Example: A multicast paging is being played through my phone, I have to make a call during the multicast cast, so I pick up the phone, make the call then hang up when done. The multicast stream does not reactivate when I disconnect with my call even though the stream is still active.
09-21-2016 01:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast time-to-live from 1 to 33 or a higher number than 1 at least David123321 0 4,264 10-09-2018 05:20 PM
Last Post: David123321
  T46G Backlight options briankelly63 5 14,293 05-04-2016 04:08 PM
Last Post: tikky
  T46G - Change Wallpaper in DND Mode bondingAC 5 16,729 11-13-2015 09:09 PM
Last Post: huguley
  Video on T46G/T48G HaraldL 5 15,533 06-30-2015 02:01 PM
Last Post: fire555
  Ability to remove DSS key type image on T46g tsukraw 5 15,641 02-17-2015 01:53 AM
Last Post: CWR
  Multicast Page Button for Programmable Softkey Cloud9phone 4 14,872 08-28-2014 07:21 PM
Last Post: Lucas1
  Setup dial number in phone to use multicast paging rlsabin 2 9,710 10-17-2013 02:05 AM
Last Post: rlsabin

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication