[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Model T42s and T42g, the speakerphone is enable on incoming calls
Author Message
Lissvazquez Offline
Junior Member
**

Posts: 5
Joined: Jun 2022
Reputation: 0
Post: #1
Model T42s and T42g, the speakerphone is enable on incoming calls
Our university has a variety of Yealink models. In the case of the t42s and t42g models, several cases have been reported in which lifting the handset enables the speakerphone by itself, and pressing the button ends the call. We tried to update the firmware to the latest version on both models and it seemed to be corrected but as the days passed the situation repeated itself.
I don´t have pictures/videos
07-26-2023 07:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,488
Joined: Jan 2014
Reputation: 43
Post: #2
RE: Model T42s and T42g, the speakerphone is enable on incoming calls
(07-26-2023 07:42 AM)Lissvazquez Wrote:  Our university has a variety of Yealink models. In the case of the t42s and t42g models, several cases have been reported in which lifting the handset enables the speakerphone by itself, and pressing the button ends the call. We tried to update the firmware to the latest version on both models and it seemed to be corrected but as the days passed the situation repeated itself.
I don´t have pictures/videos

Hi,

What firmware version are the phones running when the issue occurs?
Which firmware version fixes the issue?
If the issue occurs again after a few days, what is the firmware version of the phones?

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-26-2023 05:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lissvazquez Offline
Junior Member
**

Posts: 5
Joined: Jun 2022
Reputation: 0
Post: #3
RE: Model T42s and T42g, the speakerphone is enable on incoming calls
(07-26-2023 05:58 PM)complex1 Wrote:  
(07-26-2023 07:42 AM)Lissvazquez Wrote:  Our university has a variety of Yealink models. In the case of the t42s and t42g models, several cases have been reported in which lifting the handset enables the speakerphone by itself, and pressing the button ends the call. We tried to update the firmware to the latest version on both models and it seemed to be corrected but as the days passed the situation repeated itself.
I don´t have pictures/videos

Hi,

What firmware version are the phones running when the issue occurs?
Which firmware version fixes the issue?
If the issue occurs again after a few days, what is the firmware version of the phones?



For example in two cases we had
T42G 29.80.0.70 -> 29.83.0.145

T42G 29.80.0.70 -> 29.83.0.120
In both cases the problem seemed to be solved but they reported again.
07-27-2023 04:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,488
Joined: Jan 2014
Reputation: 43
Post: #4
RE: Model T42s and T42g, the speakerphone is enable on incoming calls
(07-27-2023 04:30 AM)Lissvazquez Wrote:  
(07-26-2023 05:58 PM)complex1 Wrote:  
(07-26-2023 07:42 AM)Lissvazquez Wrote:  Our university has a variety of Yealink models. In the case of the t42s and t42g models, several cases have been reported in which lifting the handset enables the speakerphone by itself, and pressing the button ends the call. We tried to update the firmware to the latest version on both models and it seemed to be corrected but as the days passed the situation repeated itself.
I don´t have pictures/videos

Hi,

What firmware version are the phones running when the issue occurs?
Which firmware version fixes the issue?
If the issue occurs again after a few days, what is the firmware version of the phones?



For example in two cases we had
T42G 29.80.0.70 -> 29.83.0.145

T42G 29.80.0.70 -> 29.83.0.120
In both cases the problem seemed to be solved but they reported again.

Hi,

After the firmware upgrade has fixed the issue and after some time the issue returns, what is the firmware at that time?
Still the updated firmware or rolled back to the previous (29.80.0.70) version?

You can also try resetting the phone to factory settings, re-provisioning to see if that fixes the issue.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-27-2023 03:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lissvazquez Offline
Junior Member
**

Posts: 5
Joined: Jun 2022
Reputation: 0
Post: #5
RE: Model T42s and T42g, the speakerphone is enable on incoming calls
I have the firmware 29.83.0.145 and I also tried that, to send all to the default values.

Another problem seen in these devices is that when you lift the speaker, it does not give a line, both when you want to make a call and when you take it.

For example in the video shown below, I tried to captured a specific moment because this situation happens 1 of 10 times.
07-28-2023 04:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lissvazquez Offline
Junior Member
**

Posts: 5
Joined: Jun 2022
Reputation: 0
Post: #6
RE: Model T42s and T42g, the speakerphone is enable on incoming calls
(07-28-2023 04:50 AM)Lissvazquez Wrote:  I have the firmware 29.83.0.145 and I also tried that, to send all to the default values.

Another problem seen in these devices is that when you lift the speaker, it does not give a line, both when you want to make a call and when you take it.

For example in the video shown below, I tried to captured a specific moment because this situation happens 1 of 10 times.


Attached File(s)
.htm  ATT00002.htm (Size: 1.84 KB / Downloads: 1)
07-28-2023 07:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,488
Joined: Jan 2014
Reputation: 43
Post: #7
RE: Model T42s and T42g, the speakerphone is enable on incoming calls
(07-28-2023 07:14 AM)Lissvazquez Wrote:  
(07-28-2023 04:50 AM)Lissvazquez Wrote:  I have the firmware 29.83.0.145 and I also tried that, to send all to the default values.

Another problem seen in these devices is that when you lift the speaker, it does not give a line, both when you want to make a call and when you take it.

For example in the video shown below, I tried to captured a specific moment because this situation happens 1 of 10 times.

Hi,

I've watched the video a few times, especially the beginning where the issue occurs, and it seems that the hookswitch is not functioning reliably.
This issue cannot be solved with a firmware update, simply because the hookswitch of this unit is a mechanical switch.
Maybe the phones are still under warranty / support?

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
(This post was last modified: 07-28-2023 10:31 PM by complex1.)
07-28-2023 10:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question SMS/Text Auto Reply on T42S tcodispot 0 306 01-09-2024 03:51 AM
Last Post: tcodispot
  T42G - Stuck at Welcome screen Maciejp 1 601 12-22-2023 01:47 AM
Last Post: complex1
  Firmware T42s Raimundo 1 1,040 11-23-2023 06:45 PM
Last Post: Darsh
  How to stop transferring calls on hold EcoEco 0 594 10-24-2023 09:08 AM
Last Post: EcoEco
  Disable X button to reject calls hercross 0 702 07-07-2023 04:01 PM
Last Post: hercross
  T43U T42S Call Park BLF robm 0 906 05-19-2023 12:16 AM
Last Post: robm
  Send different codes on keystroke (enable and disable) Marsl84 0 865 04-21-2023 08:15 PM
Last Post: Marsl84
  T42s VPN & local SIP Accounts noch work, only one of them mysterox 0 1,353 10-27-2022 04:54 PM
Last Post: mysterox
  Cannot export any files T42G Telcopc 1 2,171 10-07-2022 01:26 AM
Last Post: Telcopc
  T42S unable to update firmware brianstoiber 6 7,228 09-30-2022 05:31 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication