drpete
Junior Member
Posts: 1
Joined: Jun 2017
|
Blind Transfer not showing up
Hi
Watched the yaelink youtube video on blind transfer and when they hit the transfer button then they get a choice and one is "blind Transfer" . Mine does not show this. I have enabled blind transfer thru the webui but I can only do a attended transfer.
I want to transfer a call to ext 105 so I hit transfer button and then type 105 and must wait till a connection is made and then hit transfer again. If I do this slowly then the person saying hello is not connected in time for the transfer call to hear hello. They may only get the "lo" instead of "hello"
I just want to hit transfer or a blind transfer type in 105 and hangup or be done. Am i doing something wrong, how do I get the "blind transfer" to show up on phone screen.
Thanks
|
|
06-23-2017 11:53 PM |
|
complex1
3CX Adv. Cert. Engineer
Posts: 1,526
Joined: Jan 2014
|
RE: Blind Transfer not showing up
Hi drpete,
I have tested your scenario, but I cannot reproduce the issue.
Please upgrade the Base AND Handset(s) to the latest available firmware version and try again.
Base: http://download.support.yealink.com/down...3.0.40.zip
Handset: http://download.support.yealink.com/down...3.0.30.zip
Hope this will help.
Kind regards,
Frank.
I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
|
|
06-24-2017 08:25 AM |
|