New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T29G Display ghosting
Author Message
Chris708 Offline
Junior Member
**

Posts: 46
Joined: Mar 2015
Reputation: 0
Post: #1
T29G Display ghosting
We have a client with a lot of new T29G phones but two of the T29's, after about a month, have image ghosting with the display.

Moving to different pages or screens shows the images of the Page 1 buttons.

Is there something we can do to resolve this or do we need to return them.
02-07-2017 04:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Klaus_Yealink Offline
Super Moderator
******

Posts: 180
Joined: Jul 2015
Reputation: 0
Post: #2
RE: T29G Display ghosting
For the faulty units, please do as follows to see if we can eliminate the afterimage on screen:
A: Please power off the device for 2 hours.
B: Power it up, see if afterimage disappears. If yes, please upgrade firmware to xx.80.0.130 and enable screen saver and power saving features mentioned below.
C: If not, power off the device for longer (say 5 hours), repeat Step B.
D: If still no for C, please boot up the device. Press Menu key and go to different categories to change screen for about 10 timesPower off for 2 hours then power up.
E: If problem remains, please list all the MAC address of the faulty devices to us(support@yealink.com). We will take care.
For the units which does not appear to have such issue. We’d better apply the solutions to prevent them from the suffering the problem. Please help customer to upgrade all the devices to version: x.80.0.130. On this version, we have added three methods to fix this issue.
Method 1: power saving feature.
Simply speaking, you can configure your office hours. During the working hour, phone will not enter power saving mode. On off-work hours, phone will enter power saving mode after it has been idle for a certain period of time. All these durations can be configured through web interface and auto provision.
Please see release note of version x.80.0.125 and x.80.0.130 for configuration details.
Yealink_SIP_phones_Release_Notes_of_Version_V80.pdf
Method 2: screen saver
This feature configures the phone to initiate screen saver when it is on idle for a certain period of time. Replacing screen with moving pictures or a blank screen. It can be configured through user interface, web interface and auto provision.
Please see release note of version x.80.0.125 for more configuration details.
Method3: force to shut the screen if no operation for 72 hours as final measure.
If there is no operation on phone for 72 hours, phone will shut up screen to protect the LCD. Press any key can wake the screen up. This is compulsory and not configurable. So it is not mentioned on release note.
We strongly suggest customers to upgrade the firmware to x.80.0.130 and enable the power saving and screen saver feature to protect the screen, especially when high-contrast picture is used. Please keep us posted about the progress of firmware upgrading and make sure customer has successfully configured screen saver and power saving feature
02-08-2017 10:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris708 Offline
Junior Member
**

Posts: 46
Joined: Mar 2015
Reputation: 0
Post: #3
RE: T29G Display ghosting
I didn't have to do much troubleshooting as our vendor took the phones in for RMA. Although I can respond to some of the steps that were taken.
A: Please power off the device for 2 hours. ** This did not work

B: Power it up, see if afterimage disappears. If yes, please upgrade firmware to xx.80.0.130 and enable screen saver and power saving features mentioned below.
** Didn't do the firmware update. Not sure how that would fix a ghosting screen but will try that next time. The phone was at Firmware: 46.80.0.25

C: If not, power off the device for longer (say 5 hours), repeat Step B.
** Device was shipped to us so was def. powered off for more than 5 hours but of course, did not do the firmware update.

D: If still no for C, please boot up the device. Press Menu key and go to different categories to change screen for about 10 timesPower off for 2 hours then power up.
** Didn't do this.

E: If problem remains, please list all the MAC address of the faulty devices to us(support@yealink.com). We will take care.
** Here are the two MAC addresses but we did already send them back to their respective vendors for RMA.

MAC: 001565AC63B7
MAC: 0015659DF1AE

Just to note, I have worked LCDs monitors and there are programs that will change the display bright, then fade, then alternate colors, to reduce or remove the persistent images. That might fix the phone issue---I don't know. But it seems to me that some of the LCD screens have likely changed. I have not seen this issue with any of the hundreds of T29s we have put in...or any other yealink phone really. Our oldest client with T29s has had them for two years with no issues like this...same firmware.
03-14-2017 01:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Bug on XML Browser Image display Tercio 1 448 05-22-2019 02:54 AM
Last Post: Mike_Yealink
  T29G BLF Keys going dark rjhartman68 0 446 04-10-2019 02:59 PM
Last Post: rjhartman68
  BLF and Call Park on T29G pureit 0 433 04-02-2019 01:36 AM
Last Post: pureit
  T29G DTMF Duration mightychrisgill 1 774 02-04-2019 12:50 PM
Last Post: complex1
  T29G Remote Phonebook no lookup for incoming call Chris708 1 2,068 07-16-2018 03:15 PM
Last Post: Chris708
  T29G doesn't work Sam54 1 1,483 05-09-2018 02:04 AM
Last Post: Travis_Yealink
  T29G - Not Authorized to access the web interface shifa 2 3,751 05-04-2018 12:30 AM
Last Post: shifa
  T29G Registration failed Roshtech 1 1,528 01-29-2018 05:37 AM
Last Post: Evan_Yealink
  Automatic message display on T29G yc12843 2 1,987 01-25-2018 08:58 PM
Last Post: yc12843
  T29G Opus Codec fastdevice 2 3,473 09-07-2017 04:05 PM
Last Post: oliv

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication