[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48 stuck in boot
Author Message
KristianMedK Offline
Junior Member
**

Posts: 19
Joined: Mar 2014
Reputation: 0
Post: #1
T48 stuck in boot
i installed firmware 35.72.0.30 and now my phone i stuck at the welcome screen while booting (30 minutes now).

is there a way to do a factory reset when the phone cannot boot up ?

i tried setting up my own tftp server to make it download the old firmware again, but i get a file not found error for t48.bin and t48.rfs. which makes sense since those files aren't present, but i can't find information anywhere about what those files are supposed to contain ?
(This post was last modified: 11-07-2014 06:10 PM by KristianMedK.)
11-07-2014 04:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KristianMedK Offline
Junior Member
**

Posts: 19
Joined: Mar 2014
Reputation: 0
Post: #2
RE: T48 stuck in boot
managed to get the t48.rfs & t48.bin from a public tftp server.

would still like to know if there's an official library of some sort from yealink with the .revovery files for each phone.
11-07-2014 06:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Jim Offline
Super Moderator
******

Posts: 127
Joined: Aug 2014
Reputation: 2
Post: #3
RE: T48 stuck in boot
Hi,
Please go to below link to get the t48.rfs & t48.bin files:

ftp://Jim:v2R88xcL@ftp.yealink.com/ftp/update/T48

Hope this helps!
11-10-2014 08:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rmeier Offline
Junior Member
**

Posts: 2
Joined: Aug 2015
Reputation: 0
Post: #4
RE: T48 stuck in boot
i have the same problem on a brand-new T48 Phone. I've done a firmware update over auto provisioning and it hangs in the update process.
After an hour wait, i disconnect the Ethernet (POE).

Connect again and the phone is standing in the first boot screen.

i turn on my TFTP Server and try to upload the 3 Files. Jim, your links don't work. I found these Files somewhere on the Internet. Please make these files available on the Yealink Support Page. There is only the ROM File in the download Area.

now my point is, that the firmware upgrade process over TFTP also depends.
the T48 Phone loads the 2 Files up and start the upgrade process. Then it loads the ROM File an it freeze.

Could it be that the Firmware update doesn't work with POE? I've ordered a PowerSupply and will try the update tomorrow...

Rico
08-13-2015 02:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rmeier Offline
Junior Member
**

Posts: 2
Joined: Aug 2015
Reputation: 0
Post: #5
Sad RE: T48 stuck in boot
Hello again

I tried the Recovery Mode with the new Poweradapter and the Files from here : ftp://ftp.yealink.com//Recovery%20Mode%2...20mode.rar
It doesn't work. The Firmware Process freeze at "Firmware updating... Please do not power off !" for an hour.

What i can try next?
08-13-2015 05:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Brick MP50 stuck after call transfer af@benenden.school 4 8,256 12-22-2021 07:24 PM
Last Post: af@benenden.school
  T42G stuck on Welcome Initializing... please wait jeremyiia 3 19,946 09-22-2017 07:04 PM
Last Post: Manny Mejias
  VP 2009 unable to boot, safe boot or upgrade? TTCPeter 8 18,297 09-08-2017 07:10 AM
Last Post: Tdit
  Fonality Firmware STUCK david.ayers 6 18,136 07-06-2017 08:28 PM
Last Post: ninjoan
  T22P taking too long to boot up mloaiza 3 9,075 09-04-2014 02:24 PM
Last Post: Wilson_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication