[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSS Key Transfer mode issues
Author Message
rhartmann Offline
Junior Member
**

Posts: 2
Joined: May 2013
Reputation: 0
Post: #1
DSS Key Transfer mode issues
##0-New Call,1-Attended Transfer,2-Blind Transfer.
##The default value is 2.
transfer.dsskey_deal_type = 2

Situation 1 (works as expected)
1)Person calls into my office
2)I answer the phone
3) I press DSS key (setup as BLF value 2003)

The outside caller is blind transfered to 2003
This is what i expect, I was on an active call and i pressed a DSS key and since DSS is set to blind transfer all works correctly.

Situation 2 (NOT AS EXPECTED)
1)Person calls into my office
2)I answer the phone
3) I place call on hold
4) I press DSS key (setup as BLF value 2003)
5) the call i had on hold is transferred to 2003

I would have expected that i could talk to the person at 2003 then ended that call all while having my call on hold still sitting on hold.

Example:
1) you call me to discuss parts availability
2) i place you on hold,
3) I call the parts department to ask if we have XYZ in stock
4) I resume my call on hold
5) I inform them that the part is in stock and available

WHY is a call i placed on hold considered an ACTIVE CALL?

Am i missing something?
11-04-2014 03:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Wilson_Yealink Offline
Administrator
*******

Posts: 171
Joined: Aug 2014
Reputation: 0
Post: #2
RE: DSS Key Transfer mode issues
Hi rhartmann,

Thanks for your detailed information.
Quote:Situation 2 (NOT AS EXPECTED)
1)Person calls into my office
2)I answer the phone
3) I place call on hold
4) I press DSS key (setup as BLF value 2003)
5) the call i had on hold is transferred to 2003
I would have expected that i could talk to the person at 2003 then ended that call all while having my call on hold still sitting on hold.

Do you mean you only want to make a new call to 2003 not blind transfer to 2003?
If yes and you only want to use the BLF to realize this scenario, you need to set the transfer type to new call not blind transfer.

Code:
transfer.dsskey_deal_type = 0

If so, you can't realize your first scenario simultaneously.
So don't change the transfer type and my suggestion is below:
For example,
1) you (2001) call me (2002) to discuss parts availability
2) I (2002) place 2001 on hold,
3) I press the "new call" then dial the number 2003 to the parts department to ask if we have XYZ in stock.
4) After getting the information, I end the number 2003 call.
4) I resume the call from you(2001).
5) Then I inform you (2001) that the part is in stock and available

Am I clear?

thanks
11-04-2014 03:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rhartmann Offline
Junior Member
**

Posts: 2
Joined: May 2013
Reputation: 0
Post: #3
RE: DSS Key Transfer mode issues
I understand the work around options.

I still feel that it is a design flaw or bug to transfer a call that is on hold.
I would think that when a call is on hold it is no longer considered an ACTIVE call, and therefore
pressing the DSS key would behave the same as it does when i have no calls (i.e. behave like New Call was pressed)
11-04-2014 10:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  USB Upgrade issues acwells 5 3,936 08-25-2021 10:51 PM
Last Post: Your Voice
  Transfer to Remote Phonebook Minerva 5 13,979 10-22-2020 03:11 PM
Last Post: joe.carroll@managedinstalls.com
  VP59 - Teams-to-Teams Federated User issues darwin.ranzone@originnet.com 0 2,548 07-23-2020 04:41 PM
Last Post: darwin.ranzone@originnet.com
Question T23G Recovery Mode Upload Fail stan0ne 6 13,220 05-26-2020 02:52 PM
Last Post: Lewis-H
  Blind transfer not working on hangup bug mrabbitt@clarkecounty.gov 1 3,774 12-04-2019 04:33 PM
Last Post: Phil_Yealink
  DSS for transfer direct to voicemail lulu92 1 3,376 09-04-2019 08:42 PM
Last Post: lulu92
Exclamation Call log on after Att transfer VP-T49G Roksvel 4 6,752 06-18-2019 09:35 AM
Last Post: Roksvel
  T27G - Fall Back issues - Successive setting [Solved] BobBluePackets 6 9,901 05-28-2019 04:47 AM
Last Post: BobBluePackets
  Transfer with T2XG and call back hercross 7 8,345 09-27-2018 09:21 PM
Last Post: jolouis
  Transfer calls T26P agalindo 2 4,816 09-17-2018 09:10 AM
Last Post: agalindo

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication