V73 - Remote Control

[fabgoa]

Hello,

After update to V73 my Remote Control doesn't work :
http://192.168.1.100/cgi-bin/ConfigManAp...123456789;

With the V72 what's work !


Regards

[James_Yealink]

Hi Fabgoa,

Can you try this format:

http://192.168.1.100/servlet?p=login&q=l...123456789;

And make sure that you input a trusted IP address in Feature-> Remote Control interface.

Regards,
james

[fabgoa]

Hi,

Thanks for your answers.

But your ligne doesn't work for V72 and V73
http://192.168.1.100/servlet?p=login&q=l...123456789;

This line works for V72, but not for the V73
http://192.168.1.100/cgi-bin/ConfigManAp...123456789;

It's the same phone (T46G) and the Remote Control IP is good.

Regards

Fabgoa

[James_Yealink]

Hi Fabgoa,

I re-checked, it seems that the word "key" is missed. Please try thsi Action URI:
"http://192.168.1.100/servlet?p=login&q=login&username=admin&pwd=admin&jumpto=URI&key=number=123456789"

James

[jens_osterwohldt]

Hello,

we have some T28p with the latest firmware release 2.73.0.40.

In the past we dial with the URL "http://192.168.x.x/cgi-bin/ConfigManApp.com?number=123456&outgoing_uri=1" without problems from the pc.

Now i set my client pc ip address into "Features/Remote Control/Action URI allow IP List" and try the new action url "http://192.168.x.x/servlet?p=login&q=login&username=admin&pwd=admin&jumpto=URI&key=number=123456", but nothing happend.

Whats wrong?

Regards

[CWR]

I just tested on a T46 v73 and it worked fine.
Is the username and password correct?

PS: No need to x out private IP's. They only exist in your subnet.