V73 - Remote Control - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: FAQs etc (/forumdisplay.php?fid=38) +--- Forum: V73 Official Firmware (/forumdisplay.php?fid=41) +--- Thread: V73 - Remote Control (/showthread.php?tid=2510) |
V73 - Remote Control - fabgoa - 10-02-2014 04:39 PM Hello, After update to V73 my Remote Control doesn't work : http://192.168.1.100/cgi-bin/ConfigManApp.com?p=login&q=loginusername=admin&pwd=admin&jumpto=URInumber=123456789; With the V72 what's work ! Regards RE: V73 - Remote Control - James_Yealink - 10-09-2014 11:27 AM Hi Fabgoa, Can you try this format: http://192.168.1.100/servlet?p=login&q=loginusername=admin&pwd=admin&jumpto=URInumber=123456789; And make sure that you input a trusted IP address in Feature-> Remote Control interface. Regards, james RE: V73 - Remote Control - fabgoa - 10-10-2014 04:32 PM Hi, Thanks for your answers. But your ligne doesn't work for V72 and V73 http://192.168.1.100/servlet?p=login&q=loginusername=admin&pwd=admin&jumpto=URInumber=123456789; This line works for V72, but not for the V73 http://192.168.1.100/cgi-bin/ConfigManApp.com?p=login&q=loginusername=admin&pwd=admin&jumpto=URInumber=123456789; It's the same phone (T46G) and the Remote Control IP is good. Regards Fabgoa RE: V73 - Remote Control - James_Yealink - 10-10-2014 08:35 PM Hi Fabgoa, I re-checked, it seems that the word "key" is missed. Please try thsi Action URI: "http://192.168.1.100/servlet?p=login&q=login&username=admin&pwd=admin&jumpto=URI&key=number=123456789" James RE: V73 - Remote Control - jens_osterwohldt - 02-18-2015 06:52 AM Hello, we have some T28p with the latest firmware release 2.73.0.40. In the past we dial with the URL "http://192.168.x.x/cgi-bin/ConfigManApp.com?number=123456&outgoing_uri=1" without problems from the pc. Now i set my client pc ip address into "Features/Remote Control/Action URI allow IP List" and try the new action url "http://192.168.x.x/servlet?p=login&q=login&username=admin&pwd=admin&jumpto=URI&key=number=123456", but nothing happend. Whats wrong? Regards RE: V73 - Remote Control - CWR - 02-18-2015 11:44 PM I just tested on a T46 v73 and it worked fine. Is the username and password correct? PS: No need to x out private IP's. They only exist in your subnet. |