3cx Auto Provision Line Keys as Call Park

[mdctech]

I am looking at Auto Provisioning the Built in 3cx Auto Provision Templates for the T38 Phones. I would like to be able to configure the 6 line keys as Call Parks. Currently I can only figure out how to Auto Provision the Line Keys as BLFs. I would think it would be possible since you can manually setup the Line Keys this way.

[Yealink Support]

Dear User,
The latest version of Auto Provisioning guide can be reached at web site below:

http://www.yealink.com/SupportDownloadfi...2&flag=142

File name: Yealink T3XG Auto Provisioning_70.0
In the auto P common config file of T38, you can configure all line keys as call parks like this:
change linekey .X.type=10(10 represents call park, X ranges from 1~6 on T38G)
#Configure Line Key1
linekey.1.line =
linekey.1.value =
linekey.1.pickup_value =
linekey.1.type =10
linekey.1.xml_phonebook =
linekey.1.label =

[mdctech]

Ok Great. That works great. Thanks for the help.

[Yealink Support]

My pleasure to help. Any further question, please send email to Support@Yealink.com or post on Forum.
Best wishes!