Log in

commsys · 05-28-2014 10:31 AM

When configuring the SIP account manually on the W52P base station, the password field does not accept exclamation marks (i.e. !).

I have noticed this on the VP530 also but it works on the T48G.

Firmware Version 25.50.0.20
Hardware Version 25.1.0.0.0.0.0

***Yealink Support*** · 05-28-2014 08:58 PM

Hi commsys,

Sorry. I test in my DECT and can reproduce this issue. I will submit to our product department.
Is this issue very important to you? If not, we will solve this issue in next major version.
I remember we don't have this issue in 25.30.0.30. Can you have a try?
25.30.0.30.rom

commsys · 05-29-2014 07:24 AM

(05-28-2014 08:58 PM)Yealink Support Wrote: Hi commsys,

Sorry. I test in my DECT and can reproduce this issue. I will submit to our product department.
Is this issue very important to you? If not, we will solve this issue in next major version.
I remember we don't have this issue in 25.30.0.30. Can you have a try?
25.30.0.30.rom

I will try that firmware version and can wait for newer firmware later on.

Thanks

EDIT: That firmware didn't work with a ! in the password field.

***Yealink Support*** · 05-29-2014 10:39 AM

Hi commsys，

Sorry. I think you can try with the latest version of W52P. Then copy your password to password line but not input ! directly.

commsys · 05-29-2014 11:08 AM

(05-29-2014 10:39 AM)Yealink Support Wrote: Hi commsys，

Sorry. I think you can try with the latest version of W52P. Then copy your password to password line but not input ! directly.

I did try copy and pasting, but the message "invalid value!" appears when you click confirm.

***Yealink Support*** · 05-30-2014 09:20 AM

Sorry. I think we have made this mistake in this firmware. We solve it in 25.30.0.30, but lack this feature in the latest firmware.

We have solved this issue in the next major firmware which will release in July.

commsys · 05-30-2014 09:24 AM

(05-30-2014 09:20 AM)Yealink Support Wrote: Sorry. I think we have made this mistake in this firmware. We solve it in 25.30.0.30, but lack this feature in the latest firmware.
Sorry. i will submit to our R&D.

I have tried both firmware versions and are unable to put the ! in the password field. I have tried copy and pasting and also just writing it in there and they are both not working.

im now using firmware version:25.30.0.30

***Yealink Support*** · 05-30-2014 09:30 AM

Hi i test in 25.30.0.30 and i can copy the ! in the password line. Can i contact with you directly?

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	W52P not working after change of broadband supplier	Jasibansel	1	716	01-22-2024 07:15 PM Last Post: complex1
	W52P not picking up IP	Burkni	4	4,472	09-19-2023 06:22 PM Last Post: Burkni
	W56H with W52P Base	dmvcomms	7	7,996	03-06-2023 04:39 PM Last Post: poznaniak
	W73H handset with W52P problem reboot	Paco Brufal	2	3,123	03-03-2023 01:21 AM Last Post: nolto
	W52P Repeater RT10/rt20/RT30	schnell-yealink	3	8,895	04-20-2022 10:17 PM Last Post: complex1
	W52P Firmware upgrade	aunijaffer@gmail.com	5	12,705	09-07-2021 11:42 PM Last Post: complex1
	W52P 2 handsets	DAZZLING	1	7,119	06-01-2021 09:55 PM Last Post: complex1
	W52P Openvpn with mikrotik	info@quantiss.com	4	17,539	04-11-2021 06:25 AM Last Post: Harms_Kubiak
	Is there no call history in web management panel in W52P?	poznaniak	1	7,779	08-10-2020 12:49 PM Last Post: complex1
	W52P factory reset without password	ralph	1	9,737	04-02-2020 03:05 AM Last Post: Yisroel_MongoTEL

Threaded Mode \| Linear Mode W52P Invalid Value in password field - !
Author	Message