Log in

mtempelman · 03-14-2014 11:28 PM

Hello,

We have a VP530 which is stuck in a loop. When it boot it goes from initialization to the autoprovisioning request and it seems it cannot get one so it resets and all starts over again. Is there any other way to wipe the config ? I've tried the recovery method and pressing OK but both don't work.

Regards,

Marcel Tempelman.

***Yealink Support*** · 04-16-2014 10:30 AM

Hi Marcel ,

You can ask your distributor for about the full recovery mode with VP530.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	VP530 and register	iromero	2	17,606	01-24-2019 09:15 AM Last Post: Robert533
	[split]Remote phonebook issue with VP530	todubiyi	2	14,347	05-31-2018 02:27 PM Last Post: Karla Maria
	VP530 - Disabling my face while in standby + Doorphone volume	Mauro	5	33,003	11-17-2016 06:47 AM Last Post: john889
	Call from VP530 to VC400 is possible?	cozpler	1	12,927	06-03-2016 05:31 AM Last Post: Yealink_Michael
	VP530 and Smartphone Android VIDEO CALL	valentinesquenet	1	15,057	06-03-2016 05:26 AM Last Post: Yealink_Michael
	VP530 with Robin Doorphone	Jerome Clamot	1	11,650	03-15-2016 07:31 PM Last Post: Karl_Yealink
	VP530 - Remote control with HTTP commands	matzu	3	16,969	02-11-2016 07:43 PM Last Post: brocksolo
	VP530 No sound for caller incoming call	sjolmers	1	12,601	12-09-2015 11:15 PM Last Post: Karl_Yealink
	Disable or remove DND Button on Screen of VP530	amit_nsec	3	15,382	09-02-2015 03:21 PM Last Post: amit_nsec
	VP530 video bug	qube001	1	9,719	08-08-2015 05:31 AM Last Post: Yealink_Michael

Threaded Mode \| Linear Mode VP530 stuck in boot loop
Author	Message