[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ldap search on incoming call is not working
Author Message
gekran Offline
Junior Member
**

Posts: 23
Joined: Jul 2013
Reputation: 0
Post: #1
Ldap search on incoming call is not working
Hello,

I have setup a ldap phonebook and configured the Yealink ldap phonebook page. Searching from the phone in Ldap phonebook works ok. But on incoming call the contact from ldap is not shown in the display of the phone.
I have the LDAP Lookup For Incoming Call enabled.


Attached File(s) Thumbnail(s)
   
01-23-2014 05:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1712222627012
Unregistered

 
Post: #2
RE: Ldap search on incoming call is not working
Hi gekran,

Can you tell me which version of your phone?
Does the incoming name in your local contact which is different with the name in LDAP ?
01-26-2014 05:14 PM
     Quote this message in a reply
amaury Offline
Junior Member
**

Posts: 2
Joined: Apr 2014
Reputation: 0
Post: #3
RE: Ldap search on incoming call is not working
Hi,

I have the same issue. I use version 2.72.0.30 on T28P with only LDAP configured (no other phonebook). LDAP search work like a charm but incomining call's search does not work (I have enabled LDAP Lookup For Incoming Call option.

Any idea ?

Thanks,
Amaury
04-13-2014 02:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #4
RE: Ldap search on incoming call is not working
Does the ldap entry have hyphens or special characters in the number?

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
04-13-2014 06:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
amaury Offline
Junior Member
**

Posts: 2
Joined: Apr 2014
Reputation: 0
Post: #5
RE: Ldap search on incoming call is not working
No, only number, like : 0123456789
04-13-2014 02:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: Ldap search on incoming call is not working
Do you test with 2.72.0.25 ? Do you follow the LDAP guide for V72?
LDAP Phonebook on Yealink IP Phones_V72
04-16-2014 11:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Ruben Offline
Junior Member
**

Posts: 2
Joined: Aug 2014
Reputation: 0
Post: #7
RE: Ldap search on incoming call is not working
I have same problem. Is it solved?
08-08-2014 03:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gekran Offline
Junior Member
**

Posts: 23
Joined: Jul 2013
Reputation: 0
Post: #8
RE: Ldap search on incoming call is not working
It's still not solved. I have the same issue with another customer using T41 and T46 phones with firmware 36.72.188.11 on the T41 and firmware 28.72.188.11 on the T46. We are using Asterisk PBX
09-10-2014 07:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Jim Offline
Super Moderator
******

Posts: 127
Joined: Aug 2014
Reputation: 2
Post: #9
RE: Ldap search on incoming call is not working
Hi,
Could you please give me the configuration file?
It is good for us to solve this issue.
You can reffer to the following configuration parameters


ldap.enable = 1
ldap.name_filter = (|(cn=%)(sn=%))
ldap.number_filter = (|(telephoneNumber=%)(mobile=%))
ldap.host = 10.2.1.55
ldap.tls_mode = 0
ldap.port = 389
ldap.base =dc=yealink,dc=cn
ldap.user = cn=manager,dc=yealink,dc=cn
ldap.password = secret
ldap.max_hits = 100
ldap.name_attr = cn sn
ldap.numb_attr = telephoneNumber mobile ipPhone
ldap.display_name = %cn
ldap.version = 3
ldap.ldap_sort = 1
ldap.dial_lookup = 1
ldap.call_out_lookup =1
ldap.call_in_lookup = 1
09-11-2014 04:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gekran Offline
Junior Member
**

Posts: 23
Joined: Jul 2013
Reputation: 0
Post: #10
RE: Ldap search on incoming call is not working
Here is the config LDAP part exported from my phone

[ LDAP ]
bEnable = 1
strLdapName =
strNameFilter = (|(cn=%)(sn=%))
strNumberFilter = (&(telephoneNumber=%)(sn=*))
strServerName = xxxxxxxxxx
nServerPort = 389
strBase = xxxxxxxx
strUserName = xxxxxxxxxx
strUserPin =
nMaxHits = 50
strNameAttr = cn sn
strNumbAttr = telephoneNumber
strDisplayName = %cn
nProtocolVersion = 3
bLookup4CallIn = 1
bLookup4Dial = 0
bSortResult = 1
nSearchDelay = 0

The strange thing is that in the webbrowser the LDAP Lookup For Incoming Call = enabled but in the exported config.bin file the blookup4Dial = 0
I suppose the blookup4Dial should be 1?[/code][/quote]
09-19-2014 09:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Add LDAP Support via Ringcentral? solveitjake 1 4,463 Yesterday 06:48 AM
Last Post: ahancock
  LDAP not matched thomas.betz1@vodafone.com 1 187 Yesterday 06:46 AM
Last Post: ahancock
  permisson to Call list on t46S ist denied wolfi30 1 444 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 348 02-23-2024 08:54 PM
Last Post: wolfi30
  MP54 Call Forwarding pureit2018 0 611 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 607 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 748 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,969 10-18-2023 12:59 PM
Last Post: sles
  Picking up a call does not display Caller's Name oliv 0 1,372 04-19-2023 04:25 PM
Last Post: oliv
  Yealink T27P -Incoming call issue rsarceno 0 1,313 01-25-2023 08:54 AM
Last Post: rsarceno

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication