[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Provision Wall Paper Stopped Working
Author Message
TRP Tech Offline
Junior Member
**

Posts: 4
Joined: Mar 2021
Reputation: 0
Post: #1
Auto Provision Wall Paper Stopped Working
For close to a year, we have hosted images on our web server and configured the provisioning files of the phones to go to the URL to download the image and then load that image as the wall paper. It has worked fine until about 3 days ago.

The image can still be accessed by going to the URL with no issue at all. In the config file, I have these two lines (this would be for a T29G phone)...

phone_setting.backgrounds = Config:T29G.jpg
wallpaper_upload.url = https://www.trpcomm.com/wp-content/uploa...2/T29G.jpg

Again, everything worked fine until a few days ago. If you manually log into the phones web portal and use the URL to download the file, it works fine.

What makes this even stranger is that it has stopped working for multiple phones, at multiple sites, and several different models. Each model phone has a different URL to use. I currently have T46s phones, T29G phones, T54W phones and a few T58's. All of them are having the exact same issue.

Any ideas on what could be going on here? It has me really frustrated.
11-18-2021 09:10 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #2
RE: Auto Provision Wall Paper Stopped Working
(11-18-2021 09:10 AM)TRP Tech Wrote:  For close to a year, we have hosted images on our web server and configured the provisioning files of the phones to go to the URL to download the image and then load that image as the wall paper. It has worked fine until about 3 days ago.

The image can still be accessed by going to the URL with no issue at all. In the config file, I have these two lines (this would be for a T29G phone)...

phone_setting.backgrounds = Config:T29G.jpg
wallpaper_upload.url = https://www.trpcomm.com/wp-content/uploa...2/T29G.jpg

Again, everything worked fine until a few days ago. If you manually log into the phones web portal and use the URL to download the file, it works fine.

What makes this even stranger is that it has stopped working for multiple phones, at multiple sites, and several different models. Each model phone has a different URL to use. I currently have T46s phones, T29G phones, T54W phones and a few T58's. All of them are having the exact same issue.

Any ideas on what could be going on here? It has me really frustrated.

Hi,

I guess this must be some centralized issue... multiple phones(?), multiple sites(?), etc.
Maybe an IP-address has been changed, who knows?
Have you tried to reset just one phone to its factory default, re-provisioning it and check if the issue is gone?

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-18-2021 07:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
TRP Tech Offline
Junior Member
**

Posts: 4
Joined: Mar 2021
Reputation: 0
Post: #3
RE: Auto Provision Wall Paper Stopped Working
(11-18-2021 07:27 PM)complex1 Wrote:  
(11-18-2021 09:10 AM)TRP Tech Wrote:  For close to a year, we have hosted images on our web server and configured the provisioning files of the phones to go to the URL to download the image and then load that image as the wall paper. It has worked fine until about 3 days ago.

The image can still be accessed by going to the URL with no issue at all. In the config file, I have these two lines (this would be for a T29G phone)...

phone_setting.backgrounds = Config:T29G.jpg
wallpaper_upload.url = https://www.trpcomm.com/wp-content/uploa...2/T29G.jpg

Again, everything worked fine until a few days ago. If you manually log into the phones web portal and use the URL to download the file, it works fine.

What makes this even stranger is that it has stopped working for multiple phones, at multiple sites, and several different models. Each model phone has a different URL to use. I currently have T46s phones, T29G phones, T54W phones and a few T58's. All of them are having the exact same issue.

Any ideas on what could be going on here? It has me really frustrated.

Hi,

I guess this must be some centralized issue... multiple phones(?), multiple sites(?), etc.
Maybe an IP-address has been changed, who knows?
Have you tried to reset just one phone to its factory default, re-provisioning it and check if the issue is gone?

Hi, thanks for the reply.

I totally agree with you except...

1. We had our web developer check and there is nothing in the web server that would be causing the issue that they can see.

2. The URL's that we use are working fine and can be manually accessed and used to load a wallpaper, just not through the provisioning file.

3. I have a T46S with the same issue. No matter what I did, I couldn't get it to work. It was always fine until yesterday. Finally, I did a firmware update on the T46S and it now works again. But that isn't a solution for the T29's and the T54's we have as those are already at the most recent firmware version. So no new firmware to try.

I did a factory reset on two of the phones with the issue and no luck. The same issue still happens.
11-18-2021 09:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
TRP Tech Offline
Junior Member
**

Posts: 4
Joined: Mar 2021
Reputation: 0
Post: #4
RE: Auto Provision Wall Paper Stopped Working
Just to add some more really strange details to this situation.

I uploaded a test picture to an online image hosting site. Here is the URL...

https://iili.io/5eyYB4.jpg

I then tested manually through the phone GUI if I could load that picture, which I could. Then I applied that as the wallpaper - no problem, worked fine.

So I downloaded the config file directly from one of the T29G phones and made sure these two lines were in the config file...

wallpaper_upload.url = https://iili.io/5eyYB4.jpg
phone_setting.backgrounds = Config:5eyYB4.jpg

Then I manually imported the config file directly to the phone. Doesn't work. Every setting I have in the config file gets applied to the phone EXCEPT the wallpaper option.

I then took the same config file and used it on the T46 and it worked perfect, the image loaded with no issue.
(This post was last modified: 11-18-2021 11:24 PM by TRP Tech.)
11-18-2021 11:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
TRP Tech Offline
Junior Member
**

Posts: 4
Joined: Mar 2021
Reputation: 0
Post: #5
RE: Auto Provision Wall Paper Stopped Working
Well, we are getting closer. Yealink support was very helpful in determining the issue is being caused by an expired SSL certificate. I guess Lets Encrypt provides SSL certificates and they made a change on September 30th. Not sure why we didn't notice until now but because of that change, Yealink phones, especially ones with older firmware, can no longer access sites using HTTPS.

Yealink support suggested adding this to my config file...
static.security.trust_certificates="0"

It is interesting - adding that to the config file allows the phone to access the HTTPS site and download the wallpaper - but the phone won't set the downloaded file as the wallpaper until I reboot the phone. Not exactly sure why. If anyone has ideas on this new (but related) issue, I am all ears. Thanks in advance for any help.
11-19-2021 10:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jamesalan Offline
Junior Member
**

Posts: 1
Joined: Feb 2024
Reputation: 0
Post: #6
RE: Auto Provision Wall Paper Stopped Working
It's quite puzzling when something that has been working seamlessly suddenly stops, especially across multiple devices and sites. It sounds like the issue might not be with the URL or the image itself, since manual downloads still work. This could indicate a change in the provisioning process or a firmware update that might have altered how the phones handle external image downloads for wallpapers. Checking any recent updates or changes in the configuration on your server-side[/color] or any common denominators across the affected devices could provide some clues.
y9
(This post was last modified: 02-19-2024 12:21 AM by jamesalan.)
02-19-2024 12:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ISRG Root X1 cert not recognized by phone during auto provision chrisduncansb 2 1,753 05-21-2024 01:23 PM
Last Post: rlaager
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 0 2,895 10-12-2023 05:49 PM
Last Post: Andi_Dee
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 2,920 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 4,686 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 7,735 04-12-2023 05:32 PM
Last Post: aaronmedina
  RPS not working for T41P T42G andrew.manning 0 2,252 02-17-2023 06:29 PM
Last Post: andrew.manning
  Yealink T54W Auto Provision not working h.cmc 1 5,402 12-09-2022 08:31 PM
Last Post: complex1
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 6,985 08-30-2022 06:28 PM
Last Post: complex1
  Auto provision username and password kbrownlees 7 25,565 08-23-2022 11:16 PM
Last Post: mbole
Question "Trusted Certificates" and auto provisioning jobst 3 7,950 06-15-2022 11:00 AM
Last Post: dbonnell

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication