Call Park feature(T26)

[centuric]

I configured a memory key for call park, the feature is working, but the light is not coming on when there is a call in the parking lot. How can I get the light to come on?

T26
Firmware Version 6.73.0.40
Hardware Version 4.0.0.4


memorykey.1.line =
memorykey.1.value = parkpos_2
memorykey.1.pickup_value =
memorykey.1.type = 10
memorykey.1.xml_phonebook =
memorykey.1.sub_type =

[Flora_Yealink]

Hi,
The light of call park is controlled by the NOTIFY message sent from the server. Please check whether the server has sent the Notify message to the phone about the state of the parking lot for example terminated.
or you can share us the pcap trace that I can check.
Best Regards!
Flora

[centuric]

(05-29-2015 04:47 AM)Flora Wrote:  Hi,
The light of call park is controlled by the NOTIFY message sent from the server. Please check whether the server has sent the Notify message to the phone about the state of the parking lot for example terminated.
or you can share us the pcap trace that I can check.
Best Regards!
Flora

I attached the pcap. Thanks

[Flora_Yealink]

Hi ,
I have checked the trace but it seems the phone didn't subscribe successfully. may I know after you configure the DSS key with call park feature, does the light of the call park will turn on ?
would you please reproduce the issue again(configure one dss key as call park,and park the call to this park lot )and provide us the config.bin file , pcap trace and level 6 syslog ?
you can refer to below link for how to catch these information.
http://forum.yealink.com/forum/showthread.php?tid=1319
also , please let me know how many phones you have ? all have the same issue ?
Best Regards!
Flora