Autoanswer internal or BLF/intercom combo

[Jeff]

Is it possible to set the T38g (firmware v. 38.70.0.221) to auto answer internal calls ONLY? (External calls would ring as usual)

I am using 3CX v12.

Any suggestions are welcome.

[James_Yealink]

Hi Jeff,

As long as there is a tag "answer-after = 0" or "intercom = true" in the invite message phone will automatically answer the call.
So you have to differ the intercom between internal and external in PBX server.

But I think you can just use intercom feature access code to achieve this?

Regards,
James

[Jeff]

(10-27-2014 08:43 PM)Yealink_James Wrote:  Hi Jeff,

As long as there is a tag "answer-after = 0" or "intercom = true" in the invite message phone will automatically.
So you have to differ the intercom between internal and external in PBX server.

But I think you can just use intercom feature access code to achieve this?

Regards,
James

Thanks James. What I am actually trying to do is to have a single button that shows whether another extension is in a call (BLF) but when pressed acts as a hands free intercom. I have been told that this is probably not possible so the internal autoanswer is just a way to achieve the same result.