+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Autoanswer internal or BLF/intercom combo (/showthread.php?tid=2627)
Autoanswer internal or BLF/intercom combo - Jeff - 10-25-2014 06:12 AM
Is it possible to set the T38g (firmware v. 38.70.0.221) to auto answer internal calls ONLY? (External calls would ring as usual)
I am using 3CX v12.
Any suggestions are welcome.
RE: Autoanswer internal or BLF/intercom combo - James_Yealink - 10-27-2014 08:43 PM
Hi Jeff,
As long as there is a tag "answer-after = 0" or "intercom = true" in the invite message phone will automatically answer the call.
So you have to differ the intercom between internal and external in PBX server.
But I think you can just use intercom feature access code to achieve this?
Regards,
James
RE: Autoanswer internal or BLF/intercom combo - Jeff - 10-30-2014 01:20 AM
(10-27-2014 08:43 PM)Yealink_James Wrote: Hi Jeff,
As long as there is a tag "answer-after = 0" or "intercom = true" in the invite message phone will automatically.
So you have to differ the intercom between internal and external in PBX server.
But I think you can just use intercom feature access code to achieve this?
Regards,
James
Thanks James. What I am actually trying to do is to have a single button that shows whether another extension is in a call (BLF) but when pressed acts as a hands free intercom. I have been told that this is probably not possible so the internal autoanswer is just a way to achieve the same result.