IPv6 not working as of 35.83.0.50

[Kevin_Yealink]

(12-22-2018 09:16 PM)Louis6321 Wrote:  In an effort to resolve an RTP QoS issue I was having, I updated my T48G to the latest available firmware (35.83.0.50).
This resolved my RTP QoS issue, but also introduced another issue:

IPv6 no-longer works.

I have IPv6 configured statically. When I look in the web portal's status page, under IPv6 it shows the WAN IP I provided but it says /0 at the end when it should be 56.

For gateway, primary DNS and secondary DNS it just says :: which is not what I've provided in the Network tab.

Is anyone else seeing this issue?

Hi Louis

This is Kevin, nice to know you here.
Please kindly go to phone web interface, then go to Status, please check if you can see the IPV6 address.

BR
Kevin