W56H with T53W via DD10 troubleshooting - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T5X Series (/forumdisplay.php?fid=58) +--- Thread: W56H with T53W via DD10 troubleshooting (/showthread.php?tid=47884) |
W56H with T53W via DD10 troubleshooting - business@voxclear.com - 07-11-2024 03:04 AM I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first? thx EDIT: now I am beginning to suspect the USB port on the T53W is at fault. Connecting a Yealink headset directly to that, not working. Troubleshooting steps for that? RE: W56H with T53W via DD10 troubleshooting - complex1 - 07-11-2024 03:31 AM (07-11-2024 03:04 AM)business@voxclear.com Wrote: I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first? Hi, Before you buy a new DD10K, you can try resetting the phone to factory settings first, which will cost you nothing. RE: W56H with T53W via DD10 troubleshooting - business@voxclear.com - 07-12-2024 05:06 AM (07-11-2024 03:31 AM)complex1 Wrote:(07-11-2024 03:04 AM)business@voxclear.com Wrote: I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first? Did that, no joy. Now networking not working! RE: W56H with T53W via DD10 troubleshooting - complex1 - 07-12-2024 07:05 PM (07-12-2024 05:06 AM)business@voxclear.com Wrote:(07-11-2024 03:31 AM)complex1 Wrote:(07-11-2024 03:04 AM)business@voxclear.com Wrote: I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first? Hi, If the phone is powered by PoE, I suggest using a separate power supply. RE: W56H with T53W via DD10 troubleshooting - business@voxclear.com - 07-30-2024 07:28 PM 95% sure the USB port on this phone is shot. Nothing works connected to it. |