How to reboot T19P_E2 by HTTP? - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: How to reboot T19P_E2 by HTTP? (/showthread.php?tid=45516) Pages: 1 2 |
How to reboot T19P_E2 by HTTP? - ogankvik - 11-21-2021 04:58 PM Hello. I have an IP Phone SIP-T19P_E2. I need to reboot it using HTTP protocol. How to do it? Tried but did NOT work: Code: http://10.238.31.69/cgi-bin/api-sys_operation?passcode=xxx&request=REBOOT& RE: How to reboot T19P_E2 by HTTP? - complex1 - 11-21-2021 08:47 PM (11-21-2021 04:58 PM)ogankvik Wrote: Hello. Hi, Please try this one: http://username:password@<phoneIPAddress>/servlet?key=Reboot RE: How to reboot T19P_E2 by HTTP? - ogankvik - 11-21-2021 09:42 PM (11-21-2021 08:47 PM)complex1 Wrote: http://username:password@<phoneIPAddress>/servlet?key=Reboot Code: c:\>wget.exe http://admin:xxx@10.238.31.12/servlet?key=Reboot I tried to apply this command through the cmd and in the browser, the result is always "You do not have permission to view this page." Login and password are 100% correct. I connect under them to the web interface of the ip phone. RE: How to reboot T19P_E2 by HTTP? - complex1 - 11-22-2021 05:17 AM I do not have a T19P_E2, but the T57W and the command work well. I use Firefox as browser. Please try to use https instead of http RE: How to reboot T19P_E2 by HTTP? - ogankvik - 11-23-2021 03:34 PM (11-22-2021 05:17 AM)complex1 Wrote: Please try to use https instead of http No, it worked. This command didn't work either: Code: https://admin:xxx@10.238.31.12/servlet?key=Reboot --no-check-certificate Updated fitware to the latest version (53.84.0.125). I tried to enter the command in different encodings. An idea has appeared, maybe in the detelphone itself you need to enable some option or tweak something? What to do.. RE: How to reboot T19P_E2 by HTTP? - complex1 - 11-24-2021 04:22 AM (11-23-2021 03:34 PM)ogankvik Wrote:(11-22-2021 05:17 AM)complex1 Wrote: Please try to use https instead of http If you think it is caused by a certificate issue, you can disable the certificate check. Go to Security > Trusted Certificates > Only Accept Trusted Certificates and select "Disabled" RE: How to reboot T19P_E2 by HTTP? - ogankvik - 11-25-2021 01:14 PM complex1, thanks for your help! It didn't work with http, I will look for another way to reboot. RE: How to reboot T19P_E2 by HTTP? - complex1 - 11-25-2021 04:48 PM (11-25-2021 01:14 PM)ogankvik Wrote: complex1, thanks for your help! It didn't work with http, I will look for another way to reboot. Hi, Have you tried https with the certificate check disabled? Is the T19P_E2 running the latest available firmware? RE: How to reboot T19P_E2 by HTTP? - ogankvik - 11-26-2021 02:10 PM [attachment=6065] [attachment=6066] complex1, hi! Only Accept Trusted Certificates "Disabled". Wimware is latest. The error has not changed: Code: c:\>wget.exe https://admin:xxx@10.238.31.12/servlet?key=Reboot RE: How to reboot T19P_E2 by HTTP? - complex1 - 11-26-2021 03:53 PM (11-26-2021 02:10 PM)ogankvik Wrote: complex1, hi! Only Accept Trusted Certificates "Disabled". Wimware is latest. Hi, Please try to execute the command directly from the browser and do not use wget.exe for now. Firefox is preferable. |