+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G: Power LED always flashing when backlight is off (/showthread.php?tid=34805)
RE: T46G: Power LED always flashing when backlight is off - Louis6321 - 06-13-2017 04:10 PM
Thanks Travis. Downloaded the ROM from the new link and it worked fine
RE: T46G: Power LED always flashing when backlight is off - Manni - 09-26-2017 02:21 PM
Problem still in the current Firmware (T48-35.82.0.20.rom)????
One year with this bug is incredible.
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 09-27-2017 09:56 AM
(09-26-2017 02:21 PM)Manni Wrote: Problem still in the current Firmware (T48-35.82.0.20.rom)????On my T46G the problem seems finally fixed with the regular new firmware V82.0.20.
One year with this bug is incredible.
RE: T46G: Power LED always flashing when backlight is off - WelshPaul - 09-30-2017 02:54 PM
(09-26-2017 02:21 PM)Manni Wrote: Problem still in the current Firmware (T48-35.82.0.20.rom)????
One year with this bug is incredible.
Yep same here although I'm using a Yealink T46G! Yealink clearly have no intention of reverting this "feature" back to how it was originally.
RE: T46G: Power LED always flashing when backlight is off - Jazzy - 10-03-2017 05:25 PM
@Travis is it possible to have a copy of the latest version of the firmware this is fixed in please?
Thanks
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 10-04-2017 02:24 PM
(09-30-2017 02:54 PM)WelshPaul Wrote: Yep same here although I'm using a Yealink T46G! Yealink clearly have no intention of reverting this "feature" back to how it was originally.This is very strange that your T46G device has still the bug with the new firmware and my device works well after the update
Did you (I did so) make a factory reset after update to the new firmware? Perhaps this may help.(10-03-2017 05:25 PM)Jazzy Wrote: @Travis is it possible to have a copy of the latest version of the firmware this is fixed in please?I think, this should be the (still active) link:
Thanks
http://ftp.yealink.com/?ShareToken=7E41428E8161575F5E5A507EA3422304484A3906
This should be the newest "special firmware", as I remember.
RE: T46G: Power LED always flashing when backlight is off - DavidSimmonds - 10-06-2017 09:49 PM
(10-04-2017 02:24 PM)Werner1959 Wrote:(09-30-2017 02:54 PM)WelshPaul Wrote: Yep same here although I'm using a Yealink T46G! Yealink clearly have no intention of reverting this "feature" back to how it was originally.This is very strange that your T46G device has still the bug with the new firmware and my device works well after the update
(10-03-2017 05:25 PM)Jazzy Wrote: @Travis is it possible to have a copy of the latest version of the firmware this is fixed in please?I think, this should be the (still active) link:
Thanks
http://ftp.yealink.com/?ShareToken=7E41428E8161575F5E5A507EA3422304484A3906
This should be the newest "special firmware", as I remember.
I am using 28.82.0.20 that I found on the yealink T46G website. I still have the blinking LED.
RE: T46G: Power LED always flashing when backlight is off - Travis_Yealink - 10-09-2017 06:04 AM
(10-04-2017 02:24 PM)Werner1959 Wrote:(09-30-2017 02:54 PM)WelshPaul Wrote: Yep same here although I'm using a Yealink T46G! Yealink clearly have no intention of reverting this "feature" back to how it was originally.This is very strange that your T46G device has still the bug with the new firmware and my device works well after the update
(10-03-2017 05:25 PM)Jazzy Wrote: @Travis is it possible to have a copy of the latest version of the firmware this is fixed in please?I think, this should be the (still active) link:
Thanks
http://ftp.yealink.com/?ShareToken=7E41428E8161575F5E5A507EA3422304484A3906
This should be the newest "special firmware", as I remember.
Dear all,
in our V82, we do have solution for this problem, hopefully, you could check our release note and our admin guide first.
13. Optimized the feature of Power Saving.
Description: For SIP-T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones, you can
also configure the flashing period for the power indicator LED when the IP phone
enters power-saving mode.
The parameters in the auto provision template are described as follows:
features.power_saving.power_led_flash.on_time =
features.power_saving.power_led_flash.off_time =
Let me know if anything I could help.
Best Regards,
Yealink_Travis
RE: T46G: Power LED always flashing when backlight is off - Jazzy - 10-09-2017 10:29 AM
(10-09-2017 06:04 AM)Travis Wrote: Dear all,
in our V82, we do have solution for this problem, hopefully, you could check our release note and our admin guide first.
13. Optimized the feature of Power Saving.
Description: For SIP-T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones, you can
also configure the flashing period for the power indicator LED when the IP phone
enters power-saving mode.
The parameters in the auto provision template are described as follows:
features.power_saving.power_led_flash.on_time =
features.power_saving.power_led_flash.off_time =
Let me know if anything I could help.
Best Regards,
Yealink_Travis
Thanks Travis that is working for me
I hadn't read the release notes as I was expecting it to be in the same place as the temp fix.. Anyway, thanks for sorting
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 10-09-2017 01:49 PM
Now I understand, why it worked on my device at once after the update to V82:
These two parameters
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 100
were part of the special firmware 81.*.91. Therefore these two values also automatically were part of my saved configuration. After the update with V82 and after reloading the saved configuration into the device these two parameters were back in the device again, although they are - different to special firmware 81.*.91 - not editable on web interface in V82.