+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: dial now and replace (/showthread.php?tid=19862)
dial now and replace - Chris Barron - 08-07-2016 10:44 PM
By holding the digit 1 for 3 seconds i want to get the phone to dial 1012.
Entering the sequence in the phone gui works ok
but putting the following in the auto provision template does nothing.
phone_setting.dialnow_delay = 3
dialplan.replace.prefix.1=1
dialplan.dialnow.rule.1 = 1
dialplan.replace.replace.1 = 1012
am i doing something wrong ?
Chris
RE: dial now and replace - Lucia_Yealink - 10-16-2016 02:49 PM
(08-07-2016 10:44 PM)Chris Barron Wrote: By holding the digit 1 for 3 seconds i want to get the phone to dial 1012.
Entering the sequence in the phone gui works ok
but putting the following in the auto provision template does nothing.
phone_setting.dialnow_delay = 3
dialplan.replace.prefix.1=1
dialplan.dialnow.rule.1 = 1
dialplan.replace.replace.1 = 1012
am i doing something wrong ?
Chris
Hi Sir，
Please note that you may be lose the parameter "#!version:1.0.0.1" in the provision file. Please use the following below and test again:
#!version:1.0.0.1
phone_setting.dialnow_delay = 3
dialplan.replace.prefix.1=1
dialplan.dialnow.rule.1 = 1
dialplan.replace.replace.1 = 1012