+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Incorrect % sign handling in display name (/showthread.php?tid=1464)
Incorrect % sign handling in display name - tomeko - 03-25-2014 12:16 AM
Hello,
it seems that v7x phones are incorrectly handling % sign in display name. After receiving such INVITE message phone is replying with non-parseable message - no closing quote after display name.
My suspicion is that phones are incorrectly expecting escaped string in display name, see http://tools.ietf.org/html/rfc4475#section-3.1.1.5 for reference.
RE: Incorrect % sign handling in display name - Yealink Support - 03-25-2014 03:35 PM
Hi tomoko，
V72 should have solved this issue. Can you check again?
RE: Incorrect % sign handling in display name - tomeko - 03-25-2014 05:23 PM
Just checked T28 with 2.72.0.30 firmware and problem still exists.
RE: Incorrect % sign handling in display name - Yealink Support - 03-25-2014 07:46 PM
I will submit this issue to our R&D.
In order to do more troubleshootings, please supply me syslog level 6, config.bin and pcap.
How to Get the Correct Syslog, Config.bin and Trace
RE: Incorrect % sign handling in display name - tomeko - 03-25-2014 08:40 PM
Attached: log/config files.
RE: Incorrect % sign handling in display name - Yealink Support - 03-26-2014 04:42 PM
Thanks to your files. I can find the problem in your pcap file.