+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: Speed Dial pause before pin (/showthread.php?tid=1309)
Pages: 1 2
Speed Dial pause before pin - dsymons - 02-23-2014 01:45 AM
Working with a T28.
I'm adding speed dial numbers that need to dial a phone number, pause and then add a pin code with a # at the end to access the conference.
Exanple 123-555-1212 ,,, 1111#. (the "," works on my cell phone others have a "P")
I've tried "," and "p" but have had no success.
What is needed for the "pause" 1-3 seconds before dialing the pin code?
RE: Speed Dial pause before pin - Yealink Support - 02-24-2014 09:11 AM
Hi dsymons,
Sorry. We don't support this feature now. If you want to add this feature, please ask your distributor for help.
I will add this feature into wishlist.
RE: Speed Dial pause before pin - Yealink Support - 02-24-2014 02:38 PM
Hi dsymons,
We will add this feature into V73. Please kindly wait for it.
RE: Speed Dial pause before pin - dsymons - 02-24-2014 11:35 PM
(02-24-2014 02:38 PM)Yealink Support Wrote: Hi dsymons,
We will add this feature into V73. Please kindly wait for it.
Thank you!
Any idea on the timing of V73 release?
Thanks again,
Dave
RE: Speed Dial pause before pin - Yealink Support - 03-03-2014 08:27 PM
Hi Dave,
Please kindly wait.
RE: Speed Dial pause before pin - bellopapo - 04-28-2014 05:07 AM
(03-03-2014 08:27 PM)Yealink Support Wrote: Please kindly wait.
hi
will be this feature available for T46g too (with the V73 release) ?
many thanks
RE: Speed Dial pause before pin - Yealink Support - 05-04-2014 11:23 PM
We will add this feature in T2/T4 series at least.
RE: Speed Dial pause before pin - bigohio - 11-18-2014 04:08 AM
(05-04-2014 11:23 PM)Yealink Support Wrote: We will add this feature in T2/T4 series at least.
It's now fourth quarter, 2014. Do you have this feature yet?
RE: Speed Dial pause before pin - James_Yealink - 11-19-2014 08:57 PM
Hi Bigohio,
Sorry, the feature has not been achieved yet.
Regards,
James
RE: Speed Dial pause before pin - fredMascull - 01-09-2015 10:38 AM
V73 firmware has now been released, can you explain how to get this working?
Thanks