+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T28/T21E2 transferring (/showthread.php?tid=12160)
T28/T21E2 transferring - securecom - 01-20-2016 09:42 AM
When a call is blind transferred to another phone the deskphone goes back to the idle screen but doesn't actually release the call until the other person answers (doesn't send BYE until it gets a 200OK from the other phone rather than sending BYE after 100TRYING).
Using 3CX v14 SP2 and the latest firmware on the phones. 3CXPhone shows the call is still active on the extension but the phone shows the idle screen.
RE: T28/T21E2 transferring - Karl_Yealink - 01-21-2016 06:05 AM
Is attend transfer work normally?
If possible, please help us to get the syslog and pcap and confing.bin files.
You can get more info from the link: http://support.yealink.com/faq/faqInfo?id=311