Yealink Forums

This seemed link a simple deal. I need to install a W76P cordless/DECT with an RT30 extender. Everything I read says it is simple, until the very first step.

Quote:Set the handset in RT30 repeater mode at with the path: Settings-> System Settings-> Repeater Mode.

Every time I do that I select RT30 the handset says I need to reboot. I do and nothing changes. I can't get the repeater to register with the base.

If I just set the base in registration mode (top LED flashing), Hold the link button on the Rt30 but nothing happens. It stays with the power green, dect flashing red, and relay off.


Any ideas what I am missing here?


W70B
Firmware Version 146.85.0.25
Hardware Version 146.0.0.0.2.0.0

W56H handset

Firmware 61.85.0.20
Hardware 61.0.0.11

(06-16-2022 10:52 PM)kcurtis Wrote: [ -> ]This seemed link a simple deal. I need to install a W76P cordless/DECT with an RT30 extender. Everything I read says it is simple, until the very first step.

Quote:Set the handset in RT30 repeater mode at with the path: Settings-> System Settings-> Repeater Mode.

Every time I do that I select RT30 the handset says I need to reboot. I do and nothing changes. I can't get the repeater to register with the base.

If I just set the base in registration mode (top LED flashing), Hold the link button on the Rt30 but nothing happens. It stays with the power green, dect flashing red, and relay off.


Any ideas what I am missing here?


W70B
Firmware Version 146.85.0.25
Hardware Version 146.0.0.0.2.0.0

W56H handset

Firmware 61.85.0.20
Hardware 61.0.0.11

Hi,

Maybe you have already checked, but do the devices work in the same region? EU or US?