(11-03-2017 12:47 PM)Scott311 Wrote: [ -> ]I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.
Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
(11-03-2017 01:17 PM)Daodeth Wrote: [ -> ] (11-03-2017 12:47 PM)Scott311 Wrote: [ -> ]I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.
Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.
Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
(11-03-2017 01:43 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:17 PM)Daodeth Wrote: [ -> ] (11-03-2017 12:47 PM)Scott311 Wrote: [ -> ]I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.
Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.
Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
So i have exported the config(cfg) from "setting/configuration/export CFG file/all settings"
I don't see any heading for "transfer:hang up."
3j
(11-03-2017 01:43 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:17 PM)Daodeth Wrote: [ -> ] (11-03-2017 12:47 PM)Scott311 Wrote: [ -> ]I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.
Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.
Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"
Am I missing a step?
(11-03-2017 01:57 PM)Daodeth Wrote: [ -> ] (11-03-2017 01:43 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:17 PM)Daodeth Wrote: [ -> ] (11-03-2017 12:47 PM)Scott311 Wrote: [ -> ]I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.
Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.
Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"
Am I missing a step?
It would be: transfer.hang_up_after_success_trans = 3
Mine was near the bottom of the config.
(11-03-2017 02:01 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:57 PM)Daodeth Wrote: [ -> ] (11-03-2017 01:43 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:17 PM)Daodeth Wrote: [ -> ] (11-03-2017 12:47 PM)Scott311 Wrote: [ -> ]I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.
Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.
Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"
Am I missing a step?
It would be: transfer.hang_up_after_success_trans = 3
Mine was near the bottom of the config.
Would you mind looking at my config and see if I'm missing something.
(11-03-2017 02:06 PM)Daodeth Wrote: [ -> ] (11-03-2017 02:01 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:57 PM)Daodeth Wrote: [ -> ] (11-03-2017 01:43 PM)Scott311 Wrote: [ -> ] (11-03-2017 01:17 PM)Daodeth Wrote: [ -> ]Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.
Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"
Am I missing a step?
It would be: transfer.hang_up_after_success_trans = 3
Mine was near the bottom of the config.
Would you mind looking at my config and see if I'm missing something.
Now question for you before I look at it, does it do it on all of your phones? Because it did not do it on all of our phones. It seemed to be ones we had setup with a call group. I would make sure you have a phone that it specifically is happening on where it shows "Talking"
Now question for you before I look at it, does it do it on all of your phones? Because it did not do it on all of our phones. It seemed to be ones we had setup with a call group. I would make sure you have a phone that it specifically is happening on where it shows "Talking"
These 2 phones are doing showing talking, one is a t48s the other is T42s. What bothers me is that the T46s are all fine.
(11-03-2017 02:17 PM)Daodeth Wrote: [ -> ]These 2 phones are doing showing talking, one is a t48s the other is T42s. What bothers me is that the T46s are all fine.
That doesn't look like the entire config of the phone. Mine was about 100-120 lines.