(04-07-2013 10:08 PM)Starlifter Wrote: [ -> ]Hello!
It's me again!
I've just tried out the new .140 firmware for my T28P. Guess what? The issue is back again. Caller ID update worked well with .133 and now it doesn't with the new one.
Come on boys, you already had fixed that issue. I have to return to .133 now (which by the way never has been published on the official page).
Hope to hear from you soon and good luck with fixing!
Greetings from cold and rainy Germany!
Same from me with the T26p . I'm now downgrading to 6.70.133. I also wondered why the 6.70.133 was never published to the official downloads page of T26p. Also we don't have a changelog for 6.70.133, nor for 6.70.133, nor for 6.70.130 ...
(04-12-2013 07:45 AM)ItsAll Good Wrote: [ -> ] (04-07-2013 10:08 PM)Starlifter Wrote: [ -> ]Hello!
It's me again!
I've just tried out the new .140 firmware for my T28P. Guess what? The issue is back again. Caller ID update worked well with .133 and now it doesn't with the new one.
Come on boys, you already had fixed that issue. I have to return to .133 now (which by the way never has been published on the official page).
Hope to hear from you soon and good luck with fixing!
Greetings from cold and rainy Germany!
Ditto
Any news on when a released firmware will include this fix?
Hello!
A few months have passed, and nothing has changed. Neither the weather in Germany (it is still cold and rainy), nor the issue with the .140 firmware.
Hello Yealink?! Are you out there?
Hello Starlifter,
Sorry for the delay, there's some adjustment for our Forum administrator.
I view this issue from the begining, and now i got your issues.
You can keep to use firmware 6.70.0.133 currently, and i think we fix this issue in our V71 firmware.
But now we just release V71 beta firmware, not commercial firmware, so we still not public this firmware to our website.
If you want, you can test this firmware firstly to check whether the problem was resolved.
If the problem is still, i will check with our R&D again, that why this issue didn't fix in V71 firmware.
You can download below T26 V71 beta firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir....0.112.rom
Thanks.
(07-01-2013 11:38 AM)Yealink Support Wrote: [ -> ]Hello Starlifter,
Sorry for the delay, there's some adjustment for our Forum administrator.
I view this issue from the begining, and now i got your issues.
You can keep to use firmware 6.70.0.133 currently, and i think we fix this issue in our V71 firmware.
But now we just release V71 beta firmware, not commercial firmware, so we still not public this firmware to our website.
If you want, you can test this firmware firstly to check whether the problem was resolved.
If the problem is still, i will check with our R&D again, that why this issue didn't fix in V71 firmware.
You can download below T26 V71 beta firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir....0.112.rom
Thanks.
The problem is resolved in 6.71.0.112 . I found another issue in 6.71.0.112 . When the registration time passes (3600 seconds or whatever you set) or you reload or you restart asterisk, the voicemail button blinks once and you hear a beep from the phone speakerphone... It is very annoying and i haven't found a way to disable it. I have the T26p
Hi Dimangelid,
Thanks for your feedback.
About the voicemail issue,please check attached two settings:
1. Disabled the Subscribe for MWI
2. Set the Stutter value as 0.
(07-03-2013 09:40 PM)dimangelid Wrote: [ -> ] (07-01-2013 11:38 AM)Yealink Support Wrote: [ -> ]Hello Starlifter,
Sorry for the delay, there's some adjustment for our Forum administrator.
I view this issue from the begining, and now i got your issues.
You can keep to use firmware 6.70.0.133 currently, and i think we fix this issue in our V71 firmware.
But now we just release V71 beta firmware, not commercial firmware, so we still not public this firmware to our website.
If you want, you can test this firmware firstly to check whether the problem was resolved.
If the problem is still, i will check with our R&D again, that why this issue didn't fix in V71 firmware.
You can download below T26 V71 beta firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir....0.112.rom
Thanks.
The problem is resolved in 6.71.0.112 . I found another issue in 6.71.0.112 . When the registration time passes (3600 seconds or whatever you set) or you reload or you restart asterisk, the voicemail button blinks once and you hear a beep from the phone speakerphone... It is very annoying and i haven't found a way to disable it. I have the T26p
We have about 1000 T22P phones and in general i'm satisfied from them. But something that worked before (RPID) should still work. We have tried x.70.0.140 and x.70.0.150 firmware and they don't fix the problem.
The version x.70.0.133 is ok. Is it possible a version of x.70 with this fix ?
I consider "dangerous" other more advanced version (x.71) because it may contain other unknown bugs as this.
(10-10-2013 04:08 PM)ibercom Wrote: [ -> ] (07-03-2013 09:40 PM)dimangelid Wrote: [ -> ] (07-01-2013 11:38 AM)Yealink Support Wrote: [ -> ]Hello Starlifter,
Sorry for the delay, there's some adjustment for our Forum administrator.
I view this issue from the begining, and now i got your issues.
You can keep to use firmware 6.70.0.133 currently, and i think we fix this issue in our V71 firmware.
But now we just release V71 beta firmware, not commercial firmware, so we still not public this firmware to our website.
If you want, you can test this firmware firstly to check whether the problem was resolved.
If the problem is still, i will check with our R&D again, that why this issue didn't fix in V71 firmware.
You can download below T26 V71 beta firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir....0.112.rom
Thanks.
The problem is resolved in 6.71.0.112 . I found another issue in 6.71.0.112 . When the registration time passes (3600 seconds or whatever you set) or you reload or you restart asterisk, the voicemail button blinks once and you hear a beep from the phone speakerphone... It is very annoying and i haven't found a way to disable it. I have the T26p
We have about 1000 T22P phones and in general i'm satisfied from them. But something that worked before (RPID) should still work. We have tried x.70.0.140 and x.70.0.150 firmware and they don't fix the problem.
The version x.70.0.133 is ok. Is it possible a version of x.70 with this fix ?
I consider "dangerous" other more advanced version (x.71) because it may contain other unknown bugs as this.
Hi Ibercom,
Now we already released V71 commercial firmware, and in this firmware, it fixed a lot of bugs which in V70 firmware.
http://www.yealink.com/Upload/T2X/T2X-V7....0.140.zip
So we suggest you use V71 firmware which is stable than V70 firmware.
Thanks.
(10-11-2013 02:46 PM)Yealink Support Wrote: [ -> ] (10-10-2013 04:08 PM)ibercom Wrote: [ -> ] (07-03-2013 09:40 PM)dimangelid Wrote: [ -> ] (07-01-2013 11:38 AM)Yealink Support Wrote: [ -> ]Hello Starlifter,
Sorry for the delay, there's some adjustment for our Forum administrator.
I view this issue from the begining, and now i got your issues.
You can keep to use firmware 6.70.0.133 currently, and i think we fix this issue in our V71 firmware.
But now we just release V71 beta firmware, not commercial firmware, so we still not public this firmware to our website.
If you want, you can test this firmware firstly to check whether the problem was resolved.
If the problem is still, i will check with our R&D again, that why this issue didn't fix in V71 firmware.
You can download below T26 V71 beta firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir....0.112.rom
Thanks.
The problem is resolved in 6.71.0.112 . I found another issue in 6.71.0.112 . When the registration time passes (3600 seconds or whatever you set) or you reload or you restart asterisk, the voicemail button blinks once and you hear a beep from the phone speakerphone... It is very annoying and i haven't found a way to disable it. I have the T26p
We have about 1000 T22P phones and in general i'm satisfied from them. But something that worked before (RPID) should still work. We have tried x.70.0.140 and x.70.0.150 firmware and they don't fix the problem.
The version x.70.0.133 is ok. Is it possible a version of x.70 with this fix ?
I consider "dangerous" other more advanced version (x.71) because it may contain other unknown bugs as this.
Hi Ibercom,
Now we already released V71 commercial firmware, and in this firmware, it fixed a lot of bugs which in V70 firmware.
http://www.yealink.com/Upload/T2X/T2X-V7....0.140.zip
So we suggest you use V71 firmware which is stable than V70 firmware.
Thanks.
Hi,
But this problem:
http://forum.yealink.com:81/forum/showth...hp?tid=869
and this:
http://forum.yealink.com:81/forum/showth...hp?tid=864
They don't allow me to make the upgrade. They are big problems for us.