I just sent to the Yealink Support the config.bin , PCAP trace and Level 6 syslog both from 6.61.0.83 and 6.70.0.120 versions. I also tried a fresh installation of the latest version of PBX in A Flash and i also have exactly the same problem... I look forward to the solution :-)
Hi,
ok, you've been faster. I'm going to send my files too, but I think they'll show pretty much the same.
dimangelid, did you try the intercom call as I suggested? When I prefix *80 to the dialed extension (I also use PBX in a Flash), the called ID is beeing displayed on the phone... Of course that's no solution, but it made me quite wonder, why it works properly on intercom calls and doesn't work on normal calls.
Edit:
Ok, just sent the requested files to techsupport@yealink.com!
(01-12-2013 07:33 PM)Starlifter Wrote: [ -> ]Hi,
ok, you've been faster. I'm going to send my files too, but I think they'll show pretty much the same.
dimangelid, did you try the intercom call as I suggested? When I prefix *80 to the dialed extension (I also use PBX in a Flash), the called ID is beeing displayed on the phone... Of course that's no solution, but it made me quite wonder, why it works properly on intercom calls and doesn't work on normal calls.
Edit:
Ok, just sent the requested files to techsupport@yealink.com!
Hello,
I just tried the intercom call and it also displays on me the dialed extension name!
(01-29-2013 04:17 PM)dimangelid Wrote: [ -> ]Hello,
I just installed the new firmware to my T26P and the issue has been fixed. Also a suggestion for any featuring firmware release is to give us an option to choose if we want to see the called extension number or name. Thank you very much for your support and any help!
Dimitris
Hello too from my side!
I'll try the new firmware asap, but if it works at dimangelid's phone, then it'll work on my phones too. Thanks a lot for the good support!
@dimangelid: isn't there already a function to disable RPID on the web config page? If not, you could disable it per extension in Asterisk...
Hello!
It's me again!
I've just tried out the new .140 firmware for my T28P. Guess what? The issue is back again. Caller ID update worked well with .133 and now it doesn't with the new one.
Come on boys, you already had fixed that issue. I have to return to .133 now (which by the way never has been published on the official page).
Hope to hear from you soon and good luck with fixing!
Greetings from cold and rainy Germany!