[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enable BLF for RingCentral
Author Message
pfear Offline
Junior Member
**

Posts: 4
Joined: Dec 2013
Reputation: 0
Post: #4
RE: Enable BLF for RingCentral
You said that you got BLF to work on the Yealink. I can get the buttons to work for pushing the button and dialing an extension, but I can't get them to work so that I can see if someone is on the phone, e.g., green light if not in use, red if in use. My buttons are just dark. No lights whatsoever.

Would you mind sharing what settings you changed to make sure it worked? I found the BLF code I think you are talking about, which would be something like: blfxxxxxxxxx@sip.ringcentral.com. And that should go in the "Value" field? Does the "Extension" field matter for Ringcentral? And I enabled "Dialog-Info Call Pickup"

Are there other settings that need to be changed?

Thanks,
12-06-2013 10:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Enable BLF for RingCentral - nace33 - 11-01-2013, 12:33 AM
RE: Enable BLF for RingCentral - nace33 - 11-03-2013, 12:23 PM
RE: Enable BLF for RingCentral - pfear - 12-06-2013 10:00 AM
RE: Enable BLF for RingCentral - KhensU - 04-30-2014, 08:38 AM
RE: Enable BLF for RingCentral - pfear - 05-01-2014, 07:06 AM
RE: Enable BLF for RingCentral - nace33 - 05-01-2014, 07:27 AM
RE: Enable BLF for RingCentral - pfear - 05-01-2014, 08:54 AM
RE: Enable BLF for RingCentral - nace33 - 05-01-2014, 09:36 AM
RE: Enable BLF for RingCentral - pfear - 05-02-2014, 08:23 AM
RE: Enable BLF for RingCentral - KhensU - 05-03-2014, 12:39 AM
RE: Enable BLF for RingCentral - nace33 - 06-23-2014, 08:11 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,720 07-28-2023 10:27 PM
Last Post: complex1
  Send different codes on keystroke (enable and disable) Marsl84 0 944 04-21-2023 08:15 PM
Last Post: Marsl84
  Account Changes/Enable Delay Chris708 2 6,096 04-25-2019 02:38 PM
Last Post: Chris708
  Enable BLF Audio Notification on a specific BLF only ipcsolutions 0 4,072 11-03-2017 09:34 PM
Last Post: ipcsolutions
  features.off_hook_answer.enable not working as expected ipcsolutions 3 7,547 09-27-2017 03:03 AM
Last Post: Lucia_Yealink
  Reboot after Web UI enable Simonburns 2 7,192 03-03-2017 10:18 AM
Last Post: Lucia_Yealink
  Enable remote phone book on T42 jason.fell@classtelecom.co.uk 1 6,655 03-19-2015 02:57 AM
Last Post: Flora_Yealink
  How to enable "second" dialtone on T42, T46G? cadillackid 4 12,945 02-02-2015 10:59 PM
Last Post: cadillackid
  T46G - Enable Time Zone Selection solutions@singlesource.net 1 11,896 03-11-2014 10:03 AM
Last Post: Yealink Support
  Enable BLF for Broadsoft CraigFox 11 50,784 03-03-2014 01:54 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication