[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Busy Signal/Beeping while on a call
Author Message
ppickens Offline
Junior Member
**

Posts: 4
Joined: Jul 2013
Reputation: 0
Post: #3
RE: Busy Signal/Beeping while on a call
(10-04-2013 09:53 PM)briankelly63 Wrote:  use a tool like Wireshark to look at RTP stream and see whats coming from where. You may be able to use Wireshark to look at the pcap file from the phone itself also.

Ah, I've actually seen this issue too and have not found a solution. It's with two different clients (who are both behind grandstream gateways). This is an isolated issue with some extensions, all of which use the T2x series of phones (T26 and T28). They are both running the supported firmware by 3cx, one is a remote PBX and one is on-site. If I run a packet capture, I can get all audio in wireshark except for the "busy signal", and there is nothing out of the ordinary on the SIP and/or RTP packets.

This only happens when the phone is the initial point of contact (in my experience) for an inbound call from an external line. We have tried different ethernet cables, ports, and ports on the switches just to eliminate any kind of layer one issues. Also it is not easily replicated due to the fact that I have called in twice from the same cell phone and gotten the issue one time and the next there was no unwanted audio signal at all.

Well if there are any questions about this that would help me troubleshoot, it would be much appreciated.

Thanks!
10-09-2013 05:18 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Busy Signal/Beeping while on a call - ppickens - 10-09-2013 05:18 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 27,586 12-27-2023 06:49 PM
Last Post: nolto
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 12,985 09-14-2020 03:49 PM
Last Post: complex1
  How to change voice when busy, waiting and other.. T20P marin 0 4,613 04-11-2019 12:53 PM
Last Post: marin
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 7,925 07-12-2018 07:28 PM
Last Post: johnkiniston
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 5,358 03-23-2018 02:52 PM
Last Post: Diego Juan
  Call Queue not working with the Grandstream UCM6202 ttran 8 24,637 03-04-2018 06:42 PM
Last Post: Adnanka
  T29G DSSKey functionality alternative number call AresK 4 13,572 12-13-2017 06:56 AM
Last Post: Evan_Yealink
  When I call outside, there's no call waiting tone highlander 3 11,446 11-15-2017 04:04 PM
Last Post: highlander
  Call Forward on T21P E2 not working gradash 8 25,164 05-23-2017 09:44 PM
Last Post: jolouis
  Call Queue not working with the Grandstream UCM6202 ttran 0 5,636 05-04-2017 05:48 PM
Last Post: ttran

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication