[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
headphone auto answer
Author Message
Barnabas Offline
Member
***

Posts: 52
Joined: May 2013
Reputation: 0
Post: #5
RE: headphone auto answer
Hello Administrator and all,

I download the configuration file config.bin of a T21P and a T19P-E2 and noticed the following configuration information:

[ Features ]
HeadsetPrior = 1

​[ General-Information ]
​HeadsetPrior = 0

Apparently if I press the "Headset" key manually it will make the headset active and even after a reboot it will keep the headset active. But if I enable it through the GUI interface in Features-> General Information -> Heaset Prior= enable, it won't do anything. Also if I set features.headset_prior= 1 in auto-provisioning the headset won't be active unless it is pressed manually. The good thing is that I need to enable the headset manually only once. It remembers this setting even after a reboot.

As you can see from the config.bin file, there are 2 different location in the firmware that need to be updated. Apparently we have access to only one.

Regards,
Barnabas
10-20-2015 05:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
headphone auto answer - renegadex - 09-24-2015, 11:09 PM
RE: headphone auto answer - James_Yealink - 09-25-2015, 06:24 AM
RE: headphone auto answer - renegadex - 09-28-2015, 06:39 PM
RE: headphone auto answer - Barnabas - 10-01-2015, 12:50 PM
RE: headphone auto answer - Barnabas - 10-20-2015 05:21 AM
RE: headphone auto answer - James_Yealink - 10-20-2015, 11:16 AM
RE: headphone auto answer - julilluss - 10-21-2015, 11:31 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  YEALINK AUTO PROVISION Dmitryche 1 978 08-09-2019 09:25 AM
Last Post: Paz_Yealink
  Auto firmware upgrade Kala 2 2,638 05-21-2018 03:50 PM
Last Post: Kala
Question speaker on auto answer Sergey_9_ 8 6,662 07-07-2017 08:01 AM
Last Post: Lucia_Yealink
Star Auto sign in for Yealink T48G nixx 1 3,078 03-01-2016 05:55 AM
Last Post: Klaus_Yealink
  T22 Lost Lock & Answer Feature lrwestrick 2 4,418 08-19-2015 03:13 AM
Last Post: Fabio Souza
  Answer second call or make a call when busy spapakons 9 26,584 02-24-2015 01:11 AM
Last Post: cloudneto
  t48G auto answering netswork 2 4,997 01-14-2015 02:17 PM
Last Post: ModCraig
  T48G Auto Provisioning For 3CX v12 Slator 1 6,036 10-22-2014 09:52 PM
Last Post: Slator
  User Must Hit Answer and When Calls End they go to Speaker jaywa73 1 4,484 12-04-2013 03:46 PM
Last Post: Yealink Support
  T42G Auto Provisioning cloud9pbx 3 7,940 07-30-2013 04:45 AM
Last Post: cloud9pbx

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication