Wrong Dialed Numbers into call logs when using Caller ID Source: PAI-FROM

[ugo.viti]

Hi,

thank you very much for the support.

This is the standard behavior of Asterisk 1.8 with PAI enabled (I must try this in Asterisk 11). However this is a useful feature, because I can see into yealink display what is my CID when calling an external number.

the CPSource=1 solution could be a temporary solution.

thank you for the info.

Best regards.

(11-20-2013 02:42 PM)Yealink Support Wrote:  Hi ugo,

Because your server send the 200 OK with a display name in P-Asserted-Identity: "CID:0575250438" <sip:3488714731@pbx.initzero.lan> .
In the PAI-FROM, phone will get the display name from your PAI、RPID.(CPSource=0). So you can see the display name CID:0575250438 in the history. If you want to change the display name, please change the header of P-Asserted-Identity.

If CPSource=1, all the display name of outgoing call will show the caller number, such as 02987654. Can you accept this choice?