[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Network Unavailable Requires User Input
Author Message
lbroyles Offline
Junior Member

Posts: 2
Joined: Oct 2013
Reputation: 0
Post: #1
Network Unavailable Requires User Input
I have installed 12 T-26 phones only to find out that there must be something different about the location's data switch. When the phones reboot it goes to "Network Unavailable" and then sits at the screen asking for network type (dhcp). After a few seconds the user can push the "Next" button and the phone will continue to boot fine.

Is there a setting somewhere to make the phone wait before attempting to connect to the network? Or a setting to make the phone keep trying and not give up so the phone will boot without user input?

This is the only location where I've had this problem so I'm sure it is something to do with the switch. It will be sometime, however, before I can replace the switch.

10-01-2013 07:20 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Network Unavailable Requires User Input - lbroyles - 10-01-2013 07:20 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  LDAP server is unavailable Andrei9385 2 4,615 07-16-2021 08:34 PM
Last Post: nolto
  BLF Light is ON when Unavailable/UNKNOWN Celso Annes 7 5,128 11-23-2020 06:46 PM
Last Post: Celso Annes
  VP59 - Teams-to-Teams Federated User issues darwin.ranzone@originnet.com 0 1,818 07-23-2020 04:41 PM
Last Post: darwin.ranzone@originnet.com
  Default user password... starion 4 5,434 10-30-2019 05:25 PM
Last Post: starion
  Slow response when user presses buttons means phone number enters incorrectly chris.stewart 1 3,194 09-26-2019 06:58 AM
Last Post: Jacqueline250
  Network Conference on Shared Line JasonTricom 0 1,904 04-16-2019 09:06 PM
Last Post: JasonTricom
  How to use <user>@<domain> instead of <user>@<ip> ? oliv 3 4,447 01-21-2019 02:41 PM
Last Post: jolouis
  User-Agent not consistent across models ABP_Support 1 3,764 02-01-2018 01:56 AM
Last Post: Evan_Yealink
  Network Conference feature Sur 11 12,367 11-07-2017 07:25 AM
Last Post: Sur
  Creating a user account is nearly impossible! Chinese 2 5,420 08-28-2017 06:23 AM
Last Post: Paul_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication