(01-11-2013 06:18 AM)ldardini Wrote: Hello,
I am using BLF on T28P and it is working great, but...
But I'd like to use a number for BLF monitoring and another number to dial when pressing the button. Is it possible? This because I'd like to use random number as username, but still retain the ability to dial the internal number, so for example, mind extension 100 has username 8547363, I want to monitor extension 8547363 but dial 100 when pressing the button.
In the phone configuration we have two fields, one named "value" where I enter the extension to monitor and one "Extension" that seems to be ignored.
Is it possible?
Leandro
Hi
I am trying to get some answers from admin, but don't seem to be getting replies!! i see you sorted out BLF can you maybe give me some help?
would you read this and tell me if you can assist me pleas.
Thanks in advance
BLF No lights
I Need Help Please...
the example below does not work, the setup in my picture only partialy works, i can oick up the call to the other line but there are No BLF light ,, i need the lights to work.
Please Help with this problem.
If you configure the a key as BLF feature, the Value means the phone number or extension you want to monitor , the Label is the name displayed on screen(only the key is line key), and the extension number is the pickup code.
For example , the phone register a account 501 and want to monitor 500,and the pickup code is *31*.
so the value is 500, the extension is *31*,once 500 has new call, 501 can press the BLF key , the phone will send *31*500 to pickup the new call.
link to my forum page
http://forum.yealink.com:81/forum/showth...183&page=2
(01-11-2013 06:18 AM)ldardini Wrote: Hello,
I am using BLF on T28P and it is working great, but...
But I'd like to use a number for BLF monitoring and another number to dial when pressing the button. Is it possible? This because I'd like to use random number as username, but still retain the ability to dial the internal number, so for example, mind extension 100 has username 8547363, I want to monitor extension 8547363 but dial 100 when pressing the button.
In the phone configuration we have two fields, one named "value" where I enter the extension to monitor and one "Extension" that seems to be ignored.
Is it possible?
Leandro
Hi
I am trying to get some answers from admin, but don't seem to be getting replies!! i see you sorted out BLF can you maybe give me some help?
would you read this and tell me if you can assist me pleas.
Thanks in advance
BLF No lights
I Need Help Please...
the example below does not work, the setup in my picture only partialy works, i can oick up the call to the other line but there are No BLF light ,, i need the lights to work.
Please Help with this problem.
If you configure the a key as BLF feature, the Value means the phone number or extension you want to monitor , the Label is the name displayed on screen(only the key is line key), and the extension number is the pickup code.
For example , the phone register a account 501 and want to monitor 500,and the pickup code is *31*.
so the value is 500, the extension is *31*,once 500 has new call, 501 can press the BLF key , the phone will send *31*500 to pickup the new call.
link to my forum page
http://forum.yealink.com:81/forum/showth...183&page=2
