[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
default username/password not working after firmware upgrade
Author Message
Mauro Offline
Member
***

Posts: 58
Joined: Nov 2012
Reputation: 1
Post: #2
RE: default username/password not working after firmware upgrade
I hope Yealink staff may help you (I'm just a user, and I wish to do some more tests with 9.61.0.148 when I have some time, to take a look if I get some password problems like you).

Just to tell a story, once I managed to gain access to a T28 after we lost its password...
(Using a temporary TFTP server and temporary changing TFTP setting in the DHCP) I created a MAC-specific autoprovisioning file containing the username/password lines ONLY... so the autoprovisioning updated the password and so I was able to log in, without losing any other setting at that moment. Good. Once inside, I exported the current configuration, to get a backup... when later switched back to the usual DHCP setting (and usual TFTP server, which contains the "complete" provisioning files) and rebooted, the phone re-applied that provisioning, overwriting part of user customizations (the part that was in the complete provisioning)... I expected this, so I then imported the configuration I previously saved, so restored the customizations.... but then it automatically re-applied the provisioning file once again, overwriting part of user customization again, and I didn't expect this. Bad! Well, at that moment, I gave up and managed to manually make the few user customizations the provisining had overwritten (fortunately, they were just a couple of things... otherwise, I may have removed such parts from the "complete" autoprovisoning file and loaded from the backup again, so another repetition of the provisioning would not have changed them again).... anyway it was still better than performing an hard reset (in that case, I fear I would have had to re-do all the configurations of all the three EXP38 (3x38=114 buttons... expanions modules buttons are not mentioned in our autoprivioning file, and I don't even know if it is possible to autoprovision them)...
Well, thinking about it now, that time I could have had a similar result by simply making any small change on that phone normal provisioning file (or "re-generate" it)... to have it restore the password specified in the provisioning at the price of overwriting a few user customized options...
(This post was last modified: 11-24-2012 12:40 AM by Mauro.)
11-24-2012 12:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: default username/password not working after firmware upgrade - Mauro - 11-24-2012 12:39 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Possible upgrade T26P Zdenda_Enter 3 1,496 07-12-2022 04:23 PM
Last Post: Zdenda_Enter
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 2,298 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  [Solved] Correct password don't work anymore in SIP-T22P ip phones frog.tech 1 6,007 01-27-2021 07:45 PM
Last Post: lsk
  T21P_E2 firmware 84.0.125 slow with VLAN GwenH 3 9,057 11-03-2020 11:01 PM
Last Post: complex1
  T21P E2 default Programmable Key label in V84 erictam 6 12,531 10-28-2020 10:32 PM
Last Post: GwenH
  T26P Can not upgrade firmware martien.poels@bank2loyalty.com 2 7,324 09-21-2020 05:16 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 48,552 06-27-2020 10:13 AM
Last Post: complex1
  Attended transfer not working T29G chysky@slany.cz 1 4,743 02-11-2020 02:48 PM
Last Post: chysky@slany.cz
  T23G Unable to obtain IP after upgrade Duncan 2 6,843 12-31-2019 10:58 PM
Last Post: Duncan
  T21P backlight not working after F/W update donb 0 3,444 11-07-2019 02:29 PM
Last Post: donb

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication